We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red Mini SAS SFF-8087 male to four SATA female breakout cable, 1.0 metre

Vszerda

Vszerda Mini SAS SFF-8087 to 4 SATA cable 3.3FT Red

SKU CH-5BG2-3MK38

Connects a Mini SAS SFF-8087 controller to four SATA drives at up to 12.0 Gbps total bandwidth over 3.3FT

  • Connects one controller to four drives via SFF-8087 breakout
  • 0 Gbps total bandwidth across four 3 Gbps lanes
  • 36-pin Mini SAS male with latch locks to host port
  • Four SATA 7-pin female connectors attach target drives
  • 3 ft red cable routes cleanly inside chassis

Mini SAS SFF-8087 breakout cable

This cable converts a single Mini SAS SFF-8087 36-pin male connector into four SATA 7-pin female connectors. It links a SAS controller or backplane to up to four SATA hard drives or SSDs. Total length is 3.3FT (1.0 metre) and the jacket is red for easy identification in dense chassis. Data transfer rate reaches 12.0 Gbps across the four lanes.

Suits builders with SAS host ports

The assembly is intended for systems that expose a Mini SAS SFF-8087 port on the host side and require direct SATA drive attachment. It will not serve installations that need SATA-to-SAS direction, external eSATA connectivity, or more than four drive connections from one cable. Buyers who want more storage lanes or a different connector gender should look at something else.

Fits standard internal cabling routes

The 1 metre length reaches typical drive bays from a motherboard or HBA slot without excess slack. Each SATA connector locks securely to the target drive, while the Mini SAS latch secures the host end. No power leads are included, so separate SATA power cables from the PSU are required for each drive. The red sheath helps trace the loom during maintenance.

Highlights

  • Connects one controller to four drives via SFF-8087 breakout
  • 0 Gbps total bandwidth across four 3 Gbps lanes
  • 36-pin Mini SAS male with latch locks to host port
  • Four SATA 7-pin female connectors attach target drives
  • 3 ft red cable routes cleanly inside chassis

Specifications

No published specifications for this item yet.

Questions about this item

Does my controller need an SFF-8087 36-pin male port to use this cable?

Yes, the cable connects to a host or RAID controller with an SFF-8087 36-pin male connector with latch.

Will the 12.0 Gbps total bandwidth work with my older 3 Gbps or 6 Gbps SATA drives?

Each of the four SATA lanes runs up to 3 Gbps, so the cable is fully compatible with 3 Gbps and 6 Gbps drives.

How can I verify the link is running at the rated speed after installation?

Check the controller BIOS or OS drive information — each connected drive should report a 3 Gbps negotiated link speed per lane.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.