We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black and blue Mini SAS SFF-8087 male to four SATA female breakout cables, 0.5m each

Vszerda

Vszerda Mini SAS SFF-8087 to 4×SATA Breakout Cable 0.5m 2-Pack

SKU CH-EJED-08SH1

Two-pack of 0.5 m Mini SAS SFF-8087 to four SATA breakout cables for connecting a RAID controller to four drives at 6 Gb/s per channel

  • TypeMini-SAS Cables
  • ColorBlack+Blue
  • Length1.6
  • Speed6 gigabits_per_second
  • ConductorCopper
  • FeaturesMINI SAS SFF-8087 to SATA 0.5m
  • Connects SAS controller to four SATA drives via SFF-8087 36-pin male to 4×SATA 7-pin female
  • Supports 6 Gbps per drive with copper conductors for reliable data transfer
  • Locking latches on both Mini-SAS and SATA ends secure connections against vibration
  • 5 m thin 30 AWG braided cables route easily inside tight chassis
  • Two-cable pack enables dual-controller or multi-array storage expansion

Host-to-Target Breakout

This two-pack provides a Mini SAS SFF-8087 male connector that plugs into a SAS HBA or RAID controller and fans out to four SATA 7-pin female ports for hard drives or SSDs. Each cable measures 0.5 m (1.6 ft) and uses 30 AWG conductors with a braided sleeve for tidy routing inside a chassis.

6 Gbit/s Per-Drive Ceiling

The assembly is rated for SAS 3 on the host side and SATA III on the target side, so each attached drive tops out at 6 Gbit/s regardless of the controller’s 12 Gbit/s capability. The forward breakout wiring only works when the SFF-8087 port acts as the host; connecting the Mini SAS end to a backplane will not function.

Replaces Bulkier Fan-Out Looms

It supersedes older, stiffer multi-lane cables that clutter tight server bays, and the labelled, latch-equipped ends speed up drive swaps. The upgrade makes sense when you need four SATA devices from a single 36-pin controller port and value the shorter 0.5 m length for clean cable management.

Highlights

  • Connects SAS controller to four SATA drives via SFF-8087 36-pin male to 4×SATA 7-pin female
  • Supports 6 Gbps per drive with copper conductors for reliable data transfer
  • Locking latches on both Mini-SAS and SATA ends secure connections against vibration
  • 5 m thin 30 AWG braided cables route easily inside tight chassis
  • Two-cable pack enables dual-controller or multi-array storage expansion

Specifications

BrandADCAUDX
ModelMINISAS-001
TypeMini-SAS Cables
ColorBlack+Blue
Length1.6
Speed6 gigabits_per_second
ConductorCopper
FeaturesMINI SAS SFF-8087 to SATA 0.5m

Questions about this item

Which length should I choose for a compact server build?

The 0.5 m (1.6 ft) version keeps cable runs short and tidy inside tight chassis, while the 3.3 ft option suits larger cases or external drive enclosures.

What does the 6 Gbps rating mean for my SATA drives?

Each of the four SATA 7-pin connectors supports up to 6 Gbps, matching SATA III speeds so SSDs and HDDs run at their native transfer rate.

How does the SFF-8087 interface limit performance?

The 36-pin Mini SAS plug is a SAS 3 host connector rated for 12 Gbps per lane, but the breakout carries four SATA III lanes at 6 Gbps each, so the SATA side sets the practical ceiling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.