We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and blue Mini SAS SFF-8087 male to four SATA 7-pin female breakout cable, 0.5 m length, braided sleeving with locking latches

Vszerda

Vszerda Mini SAS SFF-8087 to 4 SATA 0.5m 1.6ft Cable

SKU CH-0V0V-QVEE1

Connects a Mini SAS SFF-8087 controller to four SATA drives using a 1.6 ft forward breakout cable with locking latches

  • TypeMINI SAS CABLE
  • ColorBlack+Blue
  • Length1.6
  • Speed6 gigabits_per_second
  • ConductorCopper
  • FeaturesMINI SAS SFF-8087 to SATA Cable
  • Connects a SAS controller to four SATA drives
  • 5 m length keeps internal routing tidy
  • 6 Gbit/s per lane supports fast data transfer
  • 30 AWG braided wires stay flexible in tight cases
  • Locking latches on both ends secure every connection

Connection layout

This 0.5 metre breakout cable carries a single SFF-8087 male plug on the host side and splits to four SATA 7-pin female connectors for drives. It links a SAS controller or motherboard port directly to up to four SATA hard drives or SSDs, making it a practical choice for storage expansion in servers or workstations.

Sustained throughput

Each of the four SATA lanes is rated for 6 Gb/s, so the aggregate bandwidth available to the array scales with the number of active drives. The 30 AWG conductors and braided sheath keep signal integrity stable during long copy jobs or RAID rebuilds, while the locking latches on both ends prevent accidental disconnects under vibration.

Upgrade path

The cable replaces a direct backplane link when the controller presents an SFF-8087 port instead of native SATA headers, letting builders attach standard SATA drives without a backplane swap. It is not suited for configurations that require the SFF-8087 connector on the drive side or for SAS drives that need a native SAS target interface.

Highlights

  • Connects a SAS controller to four SATA drives
  • 5 m length keeps internal routing tidy
  • 6 Gbit/s per lane supports fast data transfer
  • 30 AWG braided wires stay flexible in tight cases
  • Locking latches on both ends secure every connection

Specifications

BrandADCAUDX
ModelMINISAS-001
TypeMINI SAS CABLE
ColorBlack+Blue
Length1.6
Speed6 gigabits_per_second
ConductorCopper
FeaturesMINI SAS SFF-8087 to SATA Cable

Questions about this item

Does the 0.5 m SFF-8087 breakout cable generate noticeable heat or draw extra power during continuous operation?

The cable is a passive copper assembly with no active electronics, so it adds no measurable heat or power draw when running all day.

What controller or motherboard port must I already have to use the SFF-8087 male connector?

You need a SAS HBA, RAID controller or motherboard with an internal SFF-8087 36-pin male port; the cable connects that host to four SATA drives.

Will the 6 Gbit/s SATA connectors work with older 3 Gbit/s hard drives I want to keep?

Yes, the SATA 7-pin targets are backward-compatible, so 3 Gbit/s drives will operate at their native speed on this breakout cable.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.