We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
3.3 ft Mini SAS SFF-8087 cable with locking male plugs on both ends

Vszerda

Vszerda Mini SAS SFF-8087 cable 3.3 ft 6.0 Gbps

SKU CH-6S24-YHP9J

Internal 30 AWG cable links two 36-pin SFF-8087 Mini-SAS ports at 6.0 Gbps over 3.3 ft

  • TypeComponent
  • ColorSFF-8087 to SFF-8087
  • Length3.3
  • Connector DetailSff-8087
  • Terminal GenderMale-to-Male
  • Speed6 gigabits_per_second
  • 0 Gbps throughput for fast SAS data transfer
  • 3 ft length fits standard server and rack layouts
  • 36-pin SFF-8087 male connectors with locking latch on each end
  • 30 AWG internal wiring supports reliable signal integrity
  • 19 oz lightweight design eases cable routing in tight chassis

Vszerda Mini SAS SFF-8087 Cable 3.3 ft 6.0 Gbps

This Vszerda cable carries SAS traffic at up to 6.0 Gbps over a 3.3 ft internal run. It connects two SFF-8087 ports on workstations, servers, rack-mounted servers or RAID controllers. The 36-pin male Mini-SAS plugs include locking latches for a secure fit. Supplied as a single 3.3 ft assembly.

Check Your Setup Before Ordering

Verify that both devices present an SFF-8087 Mini-SAS receptacle rated for 6.0 Gbps operation. Confirm the 3.3 ft length reaches between the intended ports inside your chassis without sharp bends. Ensure the 30 AWG conductors suit the current and airflow conditions of your build. The cable is designed for internal use only.

Thermals Noise and Power Draw in Normal Use

As a passive copper assembly the cable adds no active cooling requirement and produces no audible noise. The 30 AWG wires carry signal current with negligible resistive heating under normal SAS loads. Power draw is limited to the signalling levels of the connected controllers. No external power connection is needed.

Highlights

  • 0 Gbps throughput for fast SAS data transfer
  • 3 ft length fits standard server and rack layouts
  • 36-pin SFF-8087 male connectors with locking latch on each end
  • 30 AWG internal wiring supports reliable signal integrity
  • 19 oz lightweight design eases cable routing in tight chassis

Specifications

BrandHeretom
TypeComponent
ColorSFF-8087 to SFF-8087
Length3.3
Connector DetailSff-8087
Terminal GenderMale-to-Male
Speed6 gigabits_per_second
SpecificationsComponent
ShieldingData Transfer
FeaturesData Transfer

Questions about this item

Does the 3.3 ft SFF-8087 cable ship alone or with extra hardware?

The package contains one 3.3 ft SFF-8087 to SFF-8087 cable with locking latches on both 36-pin plugs; no brackets, screws or additional cables are included.

When should I choose the 3.3 ft length over a shorter or longer Mini-SAS cable?

Select the 3.3 ft length when the RAID controller and backplane are in the same chassis but need slack for cable routing around drive cages or full-height cards.

What does the 6.0 Gbps rating mean for a drive connected through this cable?

Each of the four lanes runs at 6.0 Gbps, so a single SAS SSD or HDD attached to one lane can transfer at up to 6.0 Gbps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.