We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS HD SFF-8644 plug with IC splitting into four SATA 7-pin connectors on 3m blue cable

Vszerda

Vszerda Mini SAS HD SFF-8644 with IC to 4 x SATA 7-Pin Cable 3m

SKU CH-JN9R-1RNSJ

Connects a Mini SAS HD SFF-8644 port with IC to four SATA 7-pin drives at 6Gbps using 28AWG copper wire over 3m

  • 6 Gbps bandwidth enables fast server-to-storage data transfer
  • SFF-8644 with IC breaks out to four SATA 7-pin connectors for HDDs and SSDs
  • 28 AWG copper wire with UL20276 rating provides low resistance and durable conductivity
  • 100 % open and short tested at 300 V for .01 s with 10 M insulation resistance
  • 3 m length suits rack-mounted servers, RAID controllers and data-centre integration

Server Storage Connectivity

This Vszerda cable bridges a Mini SAS HD SFF-8644 interface with an integrated circuit to four SATA 7-pin connectors. It delivers 6Gbps single-channel bandwidth for stable server-to-storage data transfer. The 3 metre length uses UL20276 28AWG copper wire tested for open and short circuits. It suits administrators linking RAID controllers or HBAs to multiple hard drives or SSDs.

Suitable Builds and Limits

The assembly fits chassis that route Mini SAS HD ports to discrete SATA drives, supporting HDDs, SSDs and enterprise storage arrays. Every unit withstands DC 300V for 0.01s with insulation resistance of 10M and conductive resistance of 2. Builders needing a direct Mini SAS HD to Mini SAS HD link or a different connector pitch should look at other cable types.

Deciding Specification

The defining detail is the SFF-8644 with IC to four SATA 7-pin breakout at 6Gbps over a 3 metre run. Verify that the host controller presents an SFF-8644 port and that the target drives use standard SATA 7-pin connectors before ordering.

Highlights

  • 6 Gbps bandwidth enables fast server-to-storage data transfer
  • SFF-8644 with IC breaks out to four SATA 7-pin connectors for HDDs and SSDs
  • 28 AWG copper wire with UL20276 rating provides low resistance and durable conductivity
  • 100 % open and short tested at 300 V for .01 s with 10 M insulation resistance
  • 3 m length suits rack-mounted servers, RAID controllers and data-centre integration

Specifications

No published specifications for this item yet.

Questions about this item

How do I plug the SFF-8644 end into my controller?

Align the SFF-8644 connector with the Mini SAS HD port on your RAID controller or backplane and push straight in until the latch clicks; the built-in IC handles the 6Gbps signal conversion to the four SATA 7-pin tails.

Will the 28AWG copper conductors degrade over time?

The UL20276 28AWG copper wire is tested to withstand DC 300V for .01s with insulation resistance of 10M and conductive resistance of 2, so no scheduled replacement is needed under normal server use.

What length limit affects sustained 6Gbps throughput?

This 3m assembly is the longest option offered; beyond that distance the 28AWG gauge and 6Gbps single-channel spec make signal integrity the first bottleneck.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.