We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black and blue Mini-SAS HD SFF-8643 to four SFF-8482 SATA power cables, 0.5 m each

Vszerda

Vszerda Mini-SAS HD SFF-8643 to 4× SFF-8482 SATA Power Cable 0.5 m Pack of 2

SKU CH-NY4M-MFRXQ

SFF-8643 host breakout cable splits to four SFF-8482 connectors with SATA 7-pin data and 15-pin power for 6 Gbps per drive

  • ColorBlack/Blue
  • Connects controller to four drives via SFF-8643 to SFF-8482 breakout
  • Supports 6 Gb/s per drive with SATA 7-pin data and 15-pin power
  • Thin 30 AWG braided cable at 0.5 m length for easy routing
  • Pack of two cables labelled for simple cable management
  • Host SFF-8643 male plugs into HBA or motherboard for storage expansion

Vszerda SFF-8643 breakout cable

This Vszerda cable splits one internal Mini-SAS HD SFF-8643 male connector into four SFF-8482 connectors, each carrying a SATA 7-pin data and 15-pin power interface. It connects a SAS HBA or PCIe controller to up to four SAS or SATA drives. The pack contains two cables, each 0.5 metres long, built with 30 AWG braided wiring for flexible routing.

Who this suits and who it does not

Builders expanding internal storage using a controller with an SFF-8643 port will find this breakout practical. It is not for users whose backplane or drives require the missing middle SAS pins on the SFF-8482 side, nor for anyone needing a direct SFF-8643 to SFF-8643 link. Buyers wanting longer reach should note the fixed 0.5 metre length.

Build integration and clearance

The SFF-8643 host end plugs into a compatible HBA, RAID card or motherboard header, while each SFF-8482 tail attaches to a drive or backplane bay. Every tail demands a separate SATA power connection from the PSU. The thin, taped braid eases cable management in tight chassis, and the labelled ends simplify identification during assembly or maintenance.

Highlights

  • Connects controller to four drives via SFF-8643 to SFF-8482 breakout
  • Supports 6 Gb/s per drive with SATA 7-pin data and 15-pin power
  • Thin 30 AWG braided cable at 0.5 m length for easy routing
  • Pack of two cables labelled for simple cable management
  • Host SFF-8643 male plugs into HBA or motherboard for storage expansion

Specifications

BrandADCAUDX
ModelMini SAS-012
ColorBlack/Blue

Questions about this item

Do I need a controller with an SFF-8643 port to use this cable?

Yes, the host side uses an internal MiniSAS HD SFF-8643 male connector that must plug into a compatible controller or motherboard port.

Will the SFF-8482 connectors work with my existing SATA hard drives?

Each SFF-8482 adapter includes a SATA 7-pin data and 15-pin power connector, so standard SATA drives attach directly.

How can I verify the link is running at the expected 6 Gbps per drive?

Check the controller BIOS or operating system disk utility; it should report a 6 Gbps negotiated speed for each connected drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.