We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Mini SAS SFF-8087 male to four right-angle SATA female breakout cable with black mesh sleeve and P1-P4 markers

Vszerda

Vszerda Mini SAS 36pin SFF-8087 to 90° 4×SATA 1.64ft

SKU CH-72XR-5D2RD

Connects a controller with an SFF-8087 port to four SATA drives at 6Gbps per port over a 1.64-foot cable with 90-degree connectors

  • 6 Gb/s per port for fast drive throughput
  • 90° angled SATA connectors ease tight backplane routing
  • 64 ft length with woven mesh sleeve simplifies cable management
  • P1–P4 markers give quick port identification after install
  • Tinned copper 30 AWG drain wire maintains signal integrity

Mini SAS SFF-8087 to 90° SATA breakout

This cable connects a RAID or PCIe controller with an SFF-8087 port to four SATA drives. It suits builders adding direct-attached storage to a server or workstation chassis. The forward breakout design links the host controller to target backplanes or drive cages. Each of the four ports supports up to 6Gbps data transfer.

Right-angle SATA connectors ease tight routing

The 90-degree SATA plugs reduce strain in shallow drive bays or crowded backplanes. Latch locking on both the Mini SAS and SATA ends secures connections against vibration. Woven mesh sleeving covers half the 1.64ft length for protection while keeping the cable flexible. P1 to P4 markers identify each drive lane after installation.

Sustained 6Gbps per lane across four drives

The cable carries 6Gbps per port continuously when paired with a compatible host bus adapter. Four lanes share bandwidth across two PCIe 2.0 x8 links for balanced throughput. Tinned copper drain wire at 30 AWG maintains signal integrity over the full run. Blue jacket with black sleeving aids visual tracing in dense enclosures.

Highlights

  • 6 Gb/s per port for fast drive throughput
  • 90° angled SATA connectors ease tight backplane routing
  • 64 ft length with woven mesh sleeve simplifies cable management
  • P1–P4 markers give quick port identification after install
  • Tinned copper 30 AWG drain wire maintains signal integrity

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the 6Gbps per port link is active after connecting the SFF-8087 to my controller?

Check the RAID or HBA BIOS during POST; each of the four SATA targets should negotiate at 6Gbps and appear as healthy members of the array.

What comes with the cable and what must I source separately?

The package includes the blue 1.64ft SFF-8087 male to four 90° SATA female breakout with woven mesh sleeve and P1-P4 markers; you must supply a compatible controller with an SFF-8087 port and the SATA drives.

Which length should I choose for a standard chassis?

This model is offered in a single 1.64ft length; select it when the controller-to-backplane distance fits within that reach.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.