We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda mSATA to USB 3.0 adapter board in a protective case

Vszerda

Vszerda Mini PCI-E mSATA to USB 3.0 Adapter with Case

SKU CH-5YD3-RBGN7

Converts a standard mSATA SSD into a USB 3.0 external drive reaching 500 MB/s

  • Turn any mSATA drive into a fast USB 3.0 SSD
  • Real-world transfer speeds can reach 500 MB/s
  • Works with standard-size mSATA drives only
  • Not compatible with 50 mm Mini PCI-e SATA or PATA
  • Enclosure included for a complete external storage solution

Build your own external SSD

This Vszerda adapter turns a standard mSATA drive into a USB 3.0 external solid-state drive. It fits full-size mSATA modules and includes a protective case. Real-world transfer rates can reach 500 MB/s by saturating the USB 3.0 bus. The device is brand new and ready for immediate assembly.

For mSATA owners only

Suits anyone who already has a spare mSATA SSD and wants portable high-speed storage without buying a pre-built enclosure. It will not work with 50 mm Mini PCI-e SATA or Mini PCI-e PATA cards, so owners of those modules must look elsewhere. No other drive form factors are supported by this PCB.

Only works with mSATA connector

The single specification that decides compatibility is the mSATA interface requirement. This adapter accepts only drives with a native mSATA edge connector. Any drive using a different pin-out — including half-length Mini PCI-e SATA or PATA variants — will not function.

Highlights

  • Turn any mSATA drive into a fast USB 3.0 SSD
  • Real-world transfer speeds can reach 500 MB/s
  • Works with standard-size mSATA drives only
  • Not compatible with 50 mm Mini PCI-e SATA or PATA
  • Enclosure included for a complete external storage solution

Specifications

BrandVszerda

Questions about this item

Does the Vszerda adapter run hot or draw much power when an mSATA drive is connected all day?

The adapter itself has no active cooling and draws power only from the USB 3.0 port; any warmth comes from the mSATA drive you install.

What must I already own to use this Vszerda adapter?

You need a standard-size mSATA SSD and a free USB 3.0 Type-A port on the host computer.

Will this Vszerda adapter work with the 50 mm Mini PCI-e SATA card I kept from an older laptop?

No — the adapter only accepts mSATA drives and is not compatible with 50 mm Mini PCI-e SATA or PATA cards.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.