We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with gold edge connectors on each side, about four inches square

Vszerda

Vszerda Mini PCI-E mSATA to 1.8" Micro SATA 16Pin Adapter sata cable

SKU CH-X84H-9NFV0

Converts an mSATA SSD to a 1.8" micro SATA 16-pin connector using a copper conductor

  • Connector DetailMSATA-MICRO SATA
  • Conductorcopper
  • Converts mSATA SSDs to 1.8" Micro SATA 16-pin interface
  • Copper conductor ensures reliable signal transmission for compatible drives
  • Compact 3.94 x 3.94 x .39 inch form factor fits tight spaces
  • Lightweight .71 ounce design adds minimal weight to portable systems
  • Compatible with Intel mSATA, Samsung PM800, and Toshiba mSATA SSDs

Compatibility with mSATA SSDs

This adapter connects an mSATA solid-state drive to a 1.8-inch micro SATA 16-pin interface. It supports Intel mSATA series, Samsung PM800 series and Toshiba mSATA SSDs. The copper conductor carries SATA signals through the compact circuit board.

Not for standard SATA drives

Builders who need to install a 2.5-inch or 3.5-inch SATA drive cannot use this converter. It also does not suit systems that require a full-size mSATA slot without the 1.8-inch micro SATA connection.

16-pin micro SATA connector

The adapter provides a 16-pin micro SATA receptacle that matches the 1.8-inch form factor. This single interface determines whether the target device can accept the mSATA drive.

Highlights

  • Converts mSATA SSDs to 1.8" Micro SATA 16-pin interface
  • Copper conductor ensures reliable signal transmission for compatible drives
  • Compact 3.94 x 3.94 x .39 inch form factor fits tight spaces
  • Lightweight .71 ounce design adds minimal weight to portable systems
  • Compatible with Intel mSATA, Samsung PM800, and Toshiba mSATA SSDs

Specifications

Brandchenyang
ModelCY-SA-119
Connector DetailMSATA-MICRO SATA
Conductorcopper

Questions about this item

How do I connect the mSATA SSD to the 1.8" Micro SATA 16Pin adapter?

Align the mSATA edge connector with the Mini PCI-E slot on the adapter board and press down firmly until it clicks into the retention clips.

Will the copper conductors on this adapter degrade and need replacement?

The copper conductors are solid metal and do not wear out; only physical damage to the board or bent pins would require a new adapter.

What is the first limitation when running sustained transfers through this adapter?

The throughput is capped by the SATA interface speed of the connected mSATA SSD and the 1.8" Micro SATA host controller.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.