We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Slim 74-pin to 74-pin cable with straight connectors, 100 cm long

Vszerda

Vszerda Mini Cool Edge IO 74Pin to 74Pin Cable 100CM

SKU CH-WWW5-9XA9Y

A 100 cm Mini Cool Edge IO cable with 74-pin connectors supports PCIe Gen 4, Gen 5 and Gen 6 speeds up to 64 Gb/s PAM4 over 1.0 metre

  • 60mm pitch slim connector fits compact data-centre builds
  • 64Gb/s PAM4 supports PCIe Gen 4, Gen 5 and Gen 6 over 1.0 metre
  • Identical connector for cable and card-edge enables modular, repairable designs
  • Choice of 92, 85 or 95 ohm impedance meets PCIe, NVMe and SAS specs
  • 74-pin to 74-pin double-straight cable at 100cm length

Target application

This 74-pin Mini Cool Edge IO cable suits data-centre engineers building compact, high-density systems that demand reliable high-speed signalling between boards or from board to backplane. The 0.60 mm pitch and slim form factor allow routing in tight chassis where conventional PCB traces would not fit. It is not for desktop builders who need standard SATA or eSATA drive cables.

Signal integrity under load

Rated for up to 64 Gb/s PAM4 across PCIe Gen 4, Gen 5 and Gen 6, the cable maintains signal quality over 1.0 metre and beyond 100 cm length, far exceeding typical PCB routing limits. Impedance options of 85, 92 and 95 ohms match NVMe, SAS and other high-speed specifications, preserving eye diagrams during sustained throughput.

Pre-installation checks

Verify that your hardware uses the 74-pin Mini Cool Edge IO connector with matching pinout and the required impedance profile — 85, 92 or 95 ohms — for the target protocol. Confirm the vertical or right-angle orientation fits the chassis layout and that the 100 cm reach satisfies the internal routing path. Ensure the system design supports cable-based edge connections rather than direct PCB routing.

Highlights

  • 60mm pitch slim connector fits compact data-centre builds
  • 64Gb/s PAM4 supports PCIe Gen 4, Gen 5 and Gen 6 over 1.0 metre
  • Identical connector for cable and card-edge enables modular, repairable designs
  • Choice of 92, 85 or 95 ohm impedance meets PCIe, NVMe and SAS specs
  • 74-pin to 74-pin double-straight cable at 100cm length

Specifications

No published specifications for this item yet.

Questions about this item

Does the 100 cm length of the Mini Cool Edge IO cable add noticeable heat or power loss when running continuously?

The cable is a passive high-speed interconnect rated for up to 64 Gb/s PAM4 and PCIe Gen 6 over 1.0 meter, so it does not generate heat or consume power itself.

What connectors or ports must my system already have to use this 74-pin Mini Cool Edge IO cable?

Your board or backplane needs a 74-pin Mini Cool Edge IO receptacle (x8 lane) that matches the 0.60 mm pitch vertical or right-angle footprint.

Will this 74-pin cable work with older PCIe Gen 4 or Gen 3 devices I want to keep in the chassis?

Yes, the cable supports PCIe Gen 4, Gen 5 and Gen 6 signalling, so it is backward compatible with Gen 4 and Gen 3 endpoints at their native speeds.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.