We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black mini 8-pin to 6+8-pin GPU power cable, 13.78 inches long

Vszerda

Vszerda Mini 8 Pin to 6+8 Pin GPU Power Cable Riser 0TR5TP TR5TP for Dell R740 R740xd

SKU CH-MXWW-SP472

Converts a mini 8-pin motherboard connector to a 6+8-pin GPU plug for Dell R740 and R740xd servers, rated at 12 volts and 8.33 amps

  • Connector DetailMale-to-Female
  • SpecificationsVoltage: 12 volts; Current: 8.33 amps; Weight: 79 grams; Con
  • Powers GPU from mini 8-pin motherboard header
  • Splits single port into 6-pin and 8-pin connectors
  • Delivers 12 V at 8.33 A for stable GPU operation
  • Light 79 g cable adds minimal chassis weight
  • Fits Dell R740 and R740xd server platforms

Purpose-built Dell GPU cable

The Vszerda Mini 8 Pin to 6+8 Pin riser connects a Dell R740 or R740xd motherboard to a graphics card that requires both 6-pin and 8-pin power inputs. It carries 12 Volts at 8.33 Amps through a Male-to-Female layout and ships as a single black cable weighing 79 grams.

Suited for Dell R740 GPU upgrades

This cable is for administrators adding a GPU to an R740 or R740xd chassis where the board supplies only a Mini 8 Pin header. It will not help builders using standard ATX power supplies, servers lacking the Mini 8 Pin connector, or cards that draw power solely from the slot.

Critical spec: Mini 8 Pin source connector

The motherboard side uses a proprietary Mini 8 Pin interface found on the R740 and R740xd; the cable cannot be plugged into a regular 8-pin EPS or PCIe header. Verify the server model before ordering.

Highlights

  • Powers GPU from mini 8-pin motherboard header
  • Splits single port into 6-pin and 8-pin connectors
  • Delivers 12 V at 8.33 A for stable GPU operation
  • Light 79 g cable adds minimal chassis weight
  • Fits Dell R740 and R740xd server platforms

Specifications

BrandHeretom
Model0TR5TP TR5TP
Connector DetailMale-to-Female
SpecificationsVoltage: 12 volts; Current: 8.33 amps; Weight: 79 grams; Connector: Male-to-Female; UL Listed: false

Questions about this item

What clearance is needed for the 13.78-inch cable run between the mini 8-pin motherboard header and the 6+8-pin GPU connector?

The cable measures 13.78 inches long and 0.39 inches wide, so allow at least that length plus a small bend radius inside the Dell R740 or R740xd chassis.

Which end plugs in first when installing the Male-to-Female riser — the mini 8-pin side or the 6+8-pin side?

Connect the male mini 8-pin end to the motherboard header first, then attach the female 6+8-pin end to the graphics card; reversing the order can strain the pins.

How often should the 79-gram cable be inspected or replaced in a 12-volt, 8.33-amp GPU power circuit?

Visually check the connectors and insulation during any hardware service; replace the cable if you see discoloration, melted plastic, or loose pins.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.