Innovation First, Inc.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
$72.99
0.00086135BTC
In stock
Vszerda
Vszerda MCSFF8654-4I38P-MN8087 SFF-8654 38P to SFF-8087 SAS cable 100cm
Connects SFF-8654 38P ports to SFF-8087 interfaces for 128Gbps SAS data transfer with EMI shielding and locking connectors over 100cm
- TypeSFF-8654 to SFF-8087
- ColorMulticolored
- Length18
- Connector DetailMcio Sff-8654 to Mini Sas Sff-8087
- Terminal GenderMale-to-Male
- SpecificationsSFF-8654 to SFF-8087
- Connects MCIO Slimline SFF-8654 4i 38P to Mini SAS SFF-8087 for direct enterprise storage links
- EMI shielding and secure locking connectors reduce interference and keep signals stable under vibration
- Supports PCI-E Gen5 with up to 128Gbps throughput for low-latency RAID and virtualization workloads
- Reinforced 100cm cable construction withstands heavy-duty data-centre use
- Male-to-male terminals enable plug-and-play integration with compatible server motherboards and storage arrays
Product identity
The Vszerda MCSFF8654-4I38P-MN8087 is a 100cm SAS cable that connects MCIO Slimline SFF-8654 4i 38P ports to Mini SAS SFF-8087 interfaces. It targets data-centre engineers and system integrators who need reliable links between modern storage controllers and legacy backplanes or drive enclosures.
Interface limits
The cable carries PCI-E Gen5 signalling at up to 128Gbps across the SFF-8654 to SFF-8087 bridge. EMI shielding and secure locking connectors preserve signal integrity, but the SFF-8087 end caps the link at the electrical and protocol ceiling of that older connector standard.
Capacity and headroom
Four lanes of Gen5 bandwidth give ample headroom for RAID arrays, virtualization clusters and large-scale replication workloads. The 100cm length suits typical rack spacing; longer runs or higher lane counts would require a different cable assembly.
Highlights
- Connects MCIO Slimline SFF-8654 4i 38P to Mini SAS SFF-8087 for direct enterprise storage links
- EMI shielding and secure locking connectors reduce interference and keep signals stable under vibration
- Supports PCI-E Gen5 with up to 128Gbps throughput for low-latency RAID and virtualization workloads
- Reinforced 100cm cable construction withstands heavy-duty data-centre use
- Male-to-male terminals enable plug-and-play integration with compatible server motherboards and storage arrays
Specifications
| Brand | ST-JY |
|---|---|
| Model | MCSFF8654-4I38P-MN8087 |
| Type | SFF-8654 to SFF-8087 |
| Color | Multicolored |
| Length | 18 |
| Connector Detail | Mcio Sff-8654 to Mini Sas Sff-8087 |
| Terminal Gender | Male-to-Male |
| Specifications | SFF-8654 to SFF-8087 |
| Shielding | EMI shielding, secure locking connectors, support for PCI-E Gen5 and high-speed 128Gbps data transmission |
| Features | EMI shielding, secure locking connectors, support for PCI-E Gen5 and high-speed 128Gbps data transmission |
Questions about this item
Which length should I pick for a 1U server rack?
The 100cm cable reaches between adjacent 1U trays with enough slack for cable management arms, while shorter runs may strain the locking latches.
What does the 128Gbps rating deliver in a live RAID array?
It sustains full PCI-E Gen5 bandwidth across four lanes, so a RAID-0 stripe of enterprise SSDs can push sequential reads near the controller limit without the cable becoming the bottleneck.
How does the SFF-8654 to SFF-8087 interface affect maximum throughput?
The 38-pin SFF-8654 side carries four Gen5 lanes at 128Gbps, while the SFF-8087 connector maps those lanes to legacy Mini SAS ports without reducing the aggregate rate.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Vertiv
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket
$70.99
0.00083775BTC
In stock
