We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 80cm cable with 38-pin MCIO SFF-8654 to four left-angle SATA connectors

Vszerda

Vszerda MCIOSFF8654-4XST-L MCIO SFF-8654 38P to 4x SATA Left Angle Cable 80CM

SKU CH-VAS7-HPQ4T

Connects a 38-pin SFF-8654 port to four left-angle SATA drives over an 80 cm flat cable for dense server chassis

  • TypeSAS
  • Length18
  • Connector DetailMcio
  • Terminal GenderMale-to-Female
  • Speed6 gigabits_per_second
  • SpecificationsSAS
  • SAS4.0 ready for 24Gbps aggregate throughput via SFF-8654 38Pin
  • Four SATA 7Pin ports each running at SATA3.0 6Gbps
  • Left-angle SATA connectors fit tight server bays without cable strain
  • Flat 80cm cable reduces EMI and eases routing in dense chassis
  • Hot-plug support lets you swap drives without server downtime

SFF-8654 38-pin to 4× SATA breakout cable

This 80 cm cable converts a single SFF-8654 38-pin connector into four SATA 7-pin ports, each running at SATA 3.0 6 Gbps. The flat ribbon design and left-angle SATA plugs simplify routing inside dense server chassis. It supports the SAS 4.0 standard for up to 24 Gbps aggregate throughput across the link.

Server builders needing dense SATA connectivity

The cable suits administrators who must attach multiple SATA drives to a modern backplane or HBA using the compact SFF-8654 interface. It is not for systems that lack a 38-pin SFF-8654 host port or for installations requiring right-angle or straight SATA connectors instead of the left-angle orientation provided here.

Fits tight server backplanes and drive bays

The 18 cm flat section between the MCIO plug and the SATA breakout frees space around crowded motherboard headers while the left-angle heads keep cables clear of adjacent cards. Hot-plug support lets technicians swap drives without powering down the enclosure, and the shielded construction reduces electromagnetic interference in high-density racks.

Highlights

  • SAS4.0 ready for 24Gbps aggregate throughput via SFF-8654 38Pin
  • Four SATA 7Pin ports each running at SATA3.0 6Gbps
  • Left-angle SATA connectors fit tight server bays without cable strain
  • Flat 80cm cable reduces EMI and eases routing in dense chassis
  • Hot-plug support lets you swap drives without server downtime

Specifications

BrandST-JY
ModelMCIOSFF8654-4XST-L
TypeSAS
Length18
Connector DetailMcio
Terminal GenderMale-to-Female
Speed6 gigabits_per_second
SpecificationsSAS
ShieldingHigh-speed transfer, left-angle SATA connectors, durable construction
FeaturesHigh-speed transfer, left-angle SATA connectors, durable construction

Questions about this item

What server motherboard connector does the SFF-8654 38-pin end plug into?

The cable connects to a motherboard or backplane that provides an SFF-8654 38-pin MCIO port supporting the SAS4.0 standard.

Will the left-angle SATA connectors fit older 6 Gbps SATA drives without an adapter?

Yes, each of the four SATA 7-pin connectors runs at SATA3.0 6 Gbps and mates directly with standard SATA hard drives or SSDs.

How can I verify the link is running at the expected 24 Gbps aggregate rate after installation?

Check the host controller or BIOS to confirm the MCIO port negotiates SAS4.0 and that all four SATA devices report a 6 Gbps link speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.