We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Wide MCIO connector branching to eight right-angle SATA ports on flat ribbon cable

Vszerda

Vszerda MCIO SFF-8654 8i to 8x SATA 90° Cable 100cm

SKU CH-CXJ5-Z7KSB

Connects an MCIO SFF-8654 8i host to eight 90-degree SATA drives at 16G transfer rate over a 100cm cable

  • TypeSAS
  • Length18
  • Connector DetailMcio
  • FeaturesHigh-speed transfer, 90-degree SATA connectors, durable buil
  • Connects 8 SATA drives via MCIO SFF-8654 8i
  • 90-degree SATA connectors save space in tight chassis
  • PCIe 4.0 harness supports up to 16G transfer rate
  • 100 cm length gives flexible routing in servers
  • Durable construction ensures stable operation in demanding environments

MCIO SFF-8654 8i to 8x SATA 90° Cable 100cm

This cable adapts a single MCIO SFF-8654 8i port into eight 90-degree SATA 7-pin female connectors. It is built for server and storage chassis that need to attach multiple SATA drives to a high-density controller interface. The 100 cm length suits full-height rackmount enclosures and workstation builds.

Upgrading from direct backplane

The assembly replaces a direct backplane link or a lower-count breakout when the host only exposes an MCIO 8i connector. The jump is worth it when the platform supports PCIe 4.0 or 5.0 signalling and the workload demands up to 16 G transfer rates across all eight lanes simultaneously.

Sustained throughput with eight concurrent drives

Rated for PCIe 4.0 and 5.0 harness operation, the cable maintains the 16 G lane speed under continuous multi-drive load rather than only in short bursts. The 90-degree SATA ends reduce cable stress in dense drive bays, helping signal integrity stay stable during extended RAID rebuilds or bulk data migrations.

Highlights

  • Connects 8 SATA drives via MCIO SFF-8654 8i
  • 90-degree SATA connectors save space in tight chassis
  • PCIe 4.0 harness supports up to 16G transfer rate
  • 100 cm length gives flexible routing in servers
  • Durable construction ensures stable operation in demanding environments

Specifications

BrandST-JY
ModelMCIOSFF8654-8XST-FS
TypeSAS
Length18
Connector DetailMcio
FeaturesHigh-speed transfer, 90-degree SATA connectors, durable build, space-efficient design

Questions about this item

What clearance does the 90-degree SATA connector need behind the drive?

The 90-degree SATA 7P female connectors sit flush against the drive edge, so allow roughly 18 mm of depth behind each SATA port for the right-angle moulding.

Which end plugs in first when installing the MCIO SFF-8654 8i to 8x SATA cable?

Seat the MCIO SFF-8654 8i plug into the host controller until the latch clicks, then attach each 90-degree SATA 7P female connector to the drives; reversing the order can bend the slim MCIO pins.

When should the 100 cm cable be replaced in a PCIe 4.0 16G transfer environment?

Replace the cable if the latch tabs fracture, the 90-degree SATA hoods crack, or intermittent link errors appear on any of the eight SATA channels during sustained 16G traffic.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.