Vszerda
Vszerda MCIO SFF-8654 8i PCIe 5.0 to 8x SATA 7P Right Female Cable 50cm
Connects an MCIO SFF-8654 8i port to eight right-angle SATA drives at up to 16G transfer rate
- TypeSAS
- Length18
- Connector DetailMcio
- Terminal GenderMale-to-Female
- FeaturesHigh-speed transfer, right-angle SATA connectors
- Connects 8 SATA drives through one MCIO 8654 port
- Right-angle SATA plugs fit tight server chassis
- 50 cm length gives flexible routing inside enclosures
- PCIe 4.0 harness supports up to 16 G transfer rate
- Durable build withstands demanding storage environments
MCIO SFF-8654 8i to 8 SATA breakout cable
This new Vszerda cable converts a single MCIO SFF-8654 8i port into eight SATA 7P right-angle female connectors, letting servers and storage arrays attach multiple SATA drives through one high-density interface. The 50 cm length suits typical chassis routing without excess slack.
Check MCIO port keying
Verify that your backplane or controller exposes an MCIO SFF-8654 8i receptacle with the correct pin-out, as keying differs from other MCIO variants. Ensure each right-angle SATA connector has room to seat fully against the drive PCB without fouling adjacent components or cable-management bars.
Sustained 16 Gbit/s aggregate bandwidth over PCIe
The harness is rated for up to 16 Gbit/s total throughput, so continuous sequential workloads across all eight drives remain stable without the thermal throttling sometimes seen on shorter-burst benchmarks. Durable materials and secure crimps maintain signal integrity during extended RAID rebuilds or backup windows.
Highlights
- Connects 8 SATA drives through one MCIO 8654 port
- Right-angle SATA plugs fit tight server chassis
- 50 cm length gives flexible routing inside enclosures
- PCIe 4.0 harness supports up to 16 G transfer rate
- Durable build withstands demanding storage environments
Specifications
| Brand | ST-JY |
|---|---|
| Model | MCIOSFF8654-8X7P-FR |
| Type | SAS |
| Length | 18 |
| Connector Detail | Mcio |
| Terminal Gender | Male-to-Female |
| Features | High-speed transfer, right-angle SATA connectors |
Questions about this item
Does the cable come with any drive brackets or mounting hardware, or is it just the cable itself?
The package contains only the MCIO SFF-8654 8i to 8 SATA 7P cable. No brackets, screws or additional mounting hardware are included.
The title mentions PCIe 5.0 but the highlights say PCIe 4.0 — which link speed does the cable actually support?
The cable is built for a PCIe 5.0 MCIO 8i host connector and carries 8 independent SATA lanes; the 16G transfer rate noted in the highlights corresponds to PCIe 4.0 x8 bandwidth.
What does the 16G transfer rate mean when I connect eight SATA SSDs to this cable?
The 16G figure is the aggregate host-side bandwidth across the PCIe 4.0 x8 link; each SATA drive still runs at its native 6 Gb/s, so the cable does not increase per-drive speed.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



