We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black MCIO 8i to 8x SATA twinax cable 0.8 m

Vszerda

Vszerda MCIO 8X SFF-TA-1016 to 8x SATA cable, 0.8 m

SKU CH-CRS3-G46SZ

Connects an MCIO 8X SFF-TA-1016 host to eight SATA drives over a 0.8 m silver-plated AWG31 twinax cable

  • TypeSilver-plated AWG31 Twinax Cable
  • ColorBlack
  • Length0.8
  • Connector DetailMcio 8i to 8x Sata
  • FeaturesHigh Speed
  • PCIe 4.0 support enables fast storage throughput over MCIO 8X SFF-TA-1016 to 8x SATA
  • Anti-detachment latch on MCIO connector secures link under vibration in server racks
  • Silver-plated AWG31 twinax construction preserves signal integrity at 100-ohm impedance
  • 8 metre length suits compact backplane and JBOD expansion layouts
  • Compatible with NVMe HBAs and PCIe host adapters for versatile storage deployments

MCIO 8X SFF-TA-1016 to 8x SATA Cable

This 0.8 m cable connects a MCIO 8X SFF-TA-1016 74-pin host or RAID controller to eight SATA 7-pin target drives. It is built for server storage backplanes and JBOD expansion where high-density SATA connectivity is required. The silver-plated AWG31 Twinax construction supports PCIe 4.0 data rates for reliable signal integrity.

Reinforced latch and flexible routing

The MCIO connector features an anti-detachment latch that secures the link in vibration-prone chassis. At 0.5 m of managed length the cable remains compact enough for tight server and RAID enclosures while the Twinax design resists crosstalk. Installers should verify the MCIO 8X pin-out matches their HBA or backplane before seating the latch fully.

Eight SATA lanes with PCIe 4.0 headroom

The assembly delivers eight independent SATA channels at 100-ohm SAS3.0 electrical specification, suitable for chip-to-backplane or board-to-board deployments. It comfortably handles multi-drive arrays connected to NVMe HBAs or PCIe host adapters. Bandwidth saturates when aggregate throughput exceeds the PCIe 4.0 x8 link, so very high IOPS workloads may require additional host ports.

Highlights

  • PCIe 4.0 support enables fast storage throughput over MCIO 8X SFF-TA-1016 to 8x SATA
  • Anti-detachment latch on MCIO connector secures link under vibration in server racks
  • Silver-plated AWG31 twinax construction preserves signal integrity at 100-ohm impedance
  • 8 metre length suits compact backplane and JBOD expansion layouts
  • Compatible with NVMe HBAs and PCIe host adapters for versatile storage deployments

Specifications

Brand10Gtek
TypeSilver-plated AWG31 Twinax Cable
ColorBlack
Length0.8
Connector DetailMcio 8i to 8x Sata
FeaturesHigh Speed

Questions about this item

How can I confirm the MCIO 8X SFF-TA-1016 to 8x SATA cable is functioning correctly after installation?

Verify all eight SATA drives appear in the BIOS or RAID controller utility and that each link negotiates at 6 Gbit/s without errors.

What is included with the cable and what must be purchased separately?

The package contains the 0.8 m MCIO 8X to 8x SATA cable only; SATA drives, backplane, and host adapter are sold separately.

Which cable length should I choose for my server chassis?

The 0.8 m length suits typical 2U or 4U server backplane-to-controller runs; a 0.5 m variant exists for tighter 1U spaces.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.