We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black MCIO 8i to eight SATA cable, 0.3m, silver-plated AWG31 twinax

Vszerda

Vszerda MCIO 8i to 8x SATA Cable 0.3m

SKU CH-SA8K-JXEJJ

Connects an MCIO 8i host to eight SATA drives using a 0.3 m silver-plated AWG31 twinax cable with anti-detachment latches

  • TypeSilver-plated AWG31 Twinax Cable
  • ColorBlack
  • Length0.3
  • Connector DetailMcio 8i to 8x Sata
  • FeaturesHigh Speed
  • PCIe 4.0 support via MCIO SFF-TA-1016 8X 74Pin to 8x SATA 7Pin interface for high-speed data transfer
  • Anti-detachment latch on reinforced MCIO connector with silver-plated AWG31 Twinax for reliable signal integrity
  • 100-ohm impedance for stable signal transmission
  • Compact 0.3m length suits tight server and RAID installations
  • Compatible with NVMe HBAs and PCIe host adapters for storage expansion

MCIO 8i to 8x SATA cable

This cable connects a MCIO 8i host or RAID controller to eight SATA drives using a 74-pin SFF-TA-1016 interface. It is built for server storage backplanes and JBOD expansion where high-density drive connectivity is required. The 0.3 m length suits tight internal routing in dense chassis.

Builders needing eight SATA links from one MCIO port

Installers populating backplanes or direct-attached drive cages in 1 U and 2 U servers will find the short reach and anti-detachment latch practical. It is not suited for builders who need longer runs to external enclosures or who require more than eight SATA connections from a single cable.

PCIe 4.0 rated silver-plated AWG31 twinax

The cable meets the PCIe 4.0 standard and uses silver-plated AWG31 twinax conductors with 100-ohm impedance for signal integrity at high speed. This construction decides whether the link remains stable under sustained throughput in demanding server and RAID environments.

Highlights

  • PCIe 4.0 support via MCIO SFF-TA-1016 8X 74Pin to 8x SATA 7Pin interface for high-speed data transfer
  • Anti-detachment latch on reinforced MCIO connector with silver-plated AWG31 Twinax for reliable signal integrity
  • 100-ohm impedance for stable signal transmission
  • Compact 0.3m length suits tight server and RAID installations
  • Compatible with NVMe HBAs and PCIe host adapters for storage expansion

Specifications

Brand10Gtek
TypeSilver-plated AWG31 Twinax Cable
ColorBlack
Length0.3
Connector DetailMcio 8i to 8x Sata
FeaturesHigh Speed

Questions about this item

Does the silver-plated AWG31 twinax cable generate noticeable heat when running at PCIe 4.0 speeds all day?

The silver-plated AWG31 twinax construction maintains signal integrity at PCIe 4.0 without active cooling, so heat output stays negligible in typical server airflow.

Which host-side connector must my HBA or RAID card provide for this MCIO 8i plug to mate?

The cable requires an MCIO SFF-TA-1016 8X 74-pin receptacle on the host or RAID adapter.

Can I connect this cable to a backplane that only has legacy SATA 3.0 ports?

Yes, the eight SATA 7-pin targets are standard SATA 3.0 100-ohm interfaces compatible with existing backplanes.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.