We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with M.2 slot, SATA connector and SFF-8654 port

Vszerda

Vszerda M.2 SATA to SATA 3.0 & SFF-8654 Adapter

SKU CH-S5NF-6FHHG

Adapts an M.2 SATA SSD to a SATA 3.0 port and an SFF-8654 connector

  • Converts M.2 SATA drives to standard SATA 3.0
  • Also provides SFF-8654 connection for enterprise backplanes
  • Supports NGFF M.2 SATA SSDs on desktop motherboards
  • Riser-board design fits tight chassis spaces

M.2 SATA to SATA 3.0 & SFF-8654 Adapter

This adapter connects an M.2 SATA SSD to a standard SATA 3.0 port or an SFF-8654 backplane. It suits builders adding solid-state storage to servers, workstations or NAS units that lack native M.2 slots. The board does not support NVMe drives, so buyers needing PCIe signalling must choose a different converter.

Thermals, noise and power draw

As a passive riser card, the adapter adds no fans and draws no auxiliary power. Heat from the SSD passes directly to the chassis or backplane airflow. Silent operation is guaranteed because there are no moving parts on the board itself.

Highlights

  • Converts M.2 SATA drives to standard SATA 3.0
  • Also provides SFF-8654 connection for enterprise backplanes
  • Supports NGFF M.2 SATA SSDs on desktop motherboards
  • Riser-board design fits tight chassis spaces

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the M.2 SATA SSD onto the adapter board and connect it to a SATA 3.0 port?

Insert the M.2 SATA SSD into the NGFF slot at the correct angle, secure it with the mounting screw, then attach a standard SATA data cable from the adapter's SATA connector to the motherboard or controller SATA 3.0 port.

Will the SFF-8654 connector on this adapter require any periodic maintenance or replacement?

The SFF-8654 connector is a passive interface with no moving parts; it does not need scheduled maintenance, though the cable or backplane attached to it may need replacement if damaged.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.