We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold M.2 edge connector and silver SFF-8611/8612 Oculink port

Vszerda

Vszerda M.2 NVME to SFF-8611/8612 Oculink Adapter

SKU CH-6RCS-VC3XW

Connects M.2 NVME SSDs in 2230, 2242, 2260, 2280 or 22110 sizes to a host via SFF-8611 or SFF-8612 Oculink using PCIe 3.0 x4

  • Conductorcopper
  • Connect M.2 NVME SSDs via SFF-8611/8612 Oculink
  • Supports 2230, 2242, 2260, 2280, 22110 form factors
  • PCIe 3.0 x4 interface for NVME storage
  • Copper conductor ensures reliable signal transmission
  • Lightweight 0.04 oz adapter for internal installation

NVMe to Oculink Adapter

The Vszerda adapter connects a single M.2 NVMe PCIe SSD to a host through an SFF-8611 or SFF-8612 Oculink interface. It accepts drives in 2230, 2242, 2260, 2280 and 22110 lengths. The card is designed for internal installation and targets builders adding high-speed storage to compatible mainboards or controllers.

PCIe 3.0 x4 Interface Limit

The adapter operates over a PCIe 3.0 x4 link, so maximum throughput is capped by that generation and lane count. It does not translate NVMe to SATA, nor does it convert NGFF or SATA M.2 drives to Oculink. SAS and Slimline SAS devices are not supported, so the link remains strictly PCIe-based.

Supported Drive Lengths and Exclusions

The board physically accommodates M.2 modules from 2230 up to 22110 millimetres, giving flexibility for common SSD sizes. It cannot host SATA-based M.2 drives, nor can it bridge to SAS or Slimline SAS targets. Builders needing SATA connectivity or multi-drive aggregation must use a different solution.

Highlights

  • Connect M.2 NVME SSDs via SFF-8611/8612 Oculink
  • Supports 2230, 2242, 2260, 2280, 22110 form factors
  • PCIe 3.0 x4 interface for NVME storage
  • Copper conductor ensures reliable signal transmission
  • Lightweight 0.04 oz adapter for internal installation

Specifications

Brandchenyang
ModelCY-SF-046
Conductorcopper

Questions about this item

Which M.2 form factors does this adapter accept?

The board fits one NVMe SSD in 22110, 2280, 2260, 2242 or 2230 length.

What PCIe link speed does the SFF-8611/8612 connection run at?

The adapter uses a PCIe 3.0 x4 link, so the drive operates at Gen 3 speeds.

Does the SFF-8611/8612 interface carry SAS or SATA signals?

No, the Oculink connectors are PCIe only and do not support SAS or SATA drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.