We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with gold M.2 slot and two metal brackets

Vszerda

Vszerda M.2 NVME to PCI-E Adapter M+B Key 3.0 X4 SATA

SKU CH-X1KH-T9AN7

Adapts M.2 NVME and SATA SSDs to PCI-E 3.0 X4 slots, supporting 2230, 2242, 2260 and 2280 sizes with dual M+B key ports and two metal brackets

  • Supports M.2 NVMe and SATA drives via dual M+B Key ports
  • Fits PCI-E 3.0 x4 slots and works in x4, x8 or x16 slots
  • Accommodates 2230, 2242, 2260 and 2280 form-factor SSDs
  • Includes two metal brackets at 8 cm and 12 cm lengths
  • Compatible with Windows XP through 10, Linux and macOS

Vszerda M.2 NVME to PCI-E Adapter

This adapter lets you install an M.2 NVME or SATA NGFF solid-state drive into a standard PCI-E 3.0 X4 expansion slot. It supports drives with M key or B key interfaces in lengths of 22*30 mm, 22*42 mm, 22*60 mm and 22*80 mm. The board is compatible with Windows XP through 10, Linux and MAC OS systems. It suits builders adding fast storage to a desktop without an onboard M.2 connector.

Dual M+B key mounting with two metal brackets

The PCB measures 120 X 104 X 18 mm and weighs 88 g. Two metal sheets of 10 cm and 12 cm length are included to secure the adapter in low-profile or full-height brackets. The dual M+B key slots accept both NVME and SATA protocol NGFF drives without needing a separate converter. Installation uses a standard PCI-E X4, X8 or X16 slot on the motherboard.

Passive operation with no extra power required

The adapter draws power directly from the PCI-E slot and has no onboard fan or active cooling components. Thermals depend on the installed drive and case airflow rather than the adapter itself. Silent operation is assured because there are no moving parts on the board. Power consumption is limited to the drive's own draw through the slot interface.

Highlights

  • Supports M.2 NVMe and SATA drives via dual M+B Key ports
  • Fits PCI-E 3.0 x4 slots and works in x4, x8 or x16 slots
  • Accommodates 2230, 2242, 2260 and 2280 form-factor SSDs
  • Includes two metal brackets at 8 cm and 12 cm lengths
  • Compatible with Windows XP through 10, Linux and macOS

Specifications

No published specifications for this item yet.

Questions about this item

Does the PCIe 3.0 x4 interface cap the maximum speed of an NVMe drive?

The adapter connects through a PCIe 3.0 x4 slot which provides the electrical limit for the attached NVMe drive.

What M.2 lengths and bracket sizes does the board support?

It accepts 2230, 2242, 2260 and 2280 modules and includes two metal brackets measuring 8 cm and 12 cm.

How is the adapter installed and which slot should be used?

Insert the card into any PCIe x4, x8 or x16 slot, secure the chosen bracket, then fasten the M.2 drive with the onboard screw.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.