We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter board with M.2 slot and 2.5 inch SATA connector

Vszerda

Vszerda M.2 NGFF SATA to 2.5" SATA converter adapter

SKU CH-T91E-KB5QP

Converts an M.2 NGFF SATA SSD into a 2.5-inch SATA drive for PC upgrades

  • Connector DetailNgff
  • Converts M.2 NGFF SATA SSD to 2.5" SATA
  • Works with B-key or B/M-key M.2 sockets only
  • Operates without drivers across DOS, Windows 95, 98, XP, 2000, Vista, 7, Linux, Unix
  • Powers M.2 SSD at 3.3V input with 3A maximum current
  • Compact green PCB measures 3.94 x 3.94 x 0.39 inches

Compatibility & Socket Keying

This adapter connects an M.2 NGFF SATA SSD with a B-key or B/M-key interface to a standard 2.5-inch SATA port. It is designed for specific notebook models including E431, E531, X240, Y410P and Y510P systems using PCI-E 2 lane SSDs. The PCB operates at 3.3V with a maximum input current of 3A.

Who It Suits And Who It Does Not

Builders upgrading compatible laptops listed in the specifications can use this to install an NGFF SATA drive as a bootable system disk without driver installation. It is not suitable for M-key only sockets or drives requiring a different electrical interface. Users with unsupported notebook models should verify their socket keying before purchase.

Deciding Specification

The critical detail is the socket key requirement: the adapter only functions with B-key or B/M-key M.2 slots and explicitly cannot work with M-key only sockets. Confirm your device uses a compatible B-key or B/M-key NGFF SATA SSD before ordering.

Highlights

  • Converts M.2 NGFF SATA SSD to 2.5" SATA
  • Works with B-key or B/M-key M.2 sockets only
  • Operates without drivers across DOS, Windows 95, 98, XP, 2000, Vista, 7, Linux, Unix
  • Powers M.2 SSD at 3.3V input with 3A maximum current
  • Compact green PCB measures 3.94 x 3.94 x 0.39 inches

Specifications

Brandchenyang
ModelCY-SA-123
Connector DetailNgff

Questions about this item

What is included with the Vszerda M.2 NGFF SATA converter and do I need any extra cables?

The package contains the green PCB adapter only. You will need a standard 2.5" SATA data cable and a SATA power cable from your system to connect the converted drive.

How do I know which M.2 SSD will work with the CY-SA-123 adapter?

The adapter only accepts B-key or B/M-key M.2 SATA SSDs that run on 3.3 V and draw no more than 3 A. M-key-only modules are not compatible.

Will the 3.3 V, 3 A limit affect the speed of my SSD once installed in a laptop like the X240 or Y510P?

The board does not add any driver overhead or throttle the drive; the SSD runs at its native SATA speed as long as its power draw stays within the 3 A maximum.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.