We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with M.2 slot and 2.5 inch SATA connector

Vszerda

Vszerda M.2 NGFF B/M-Key SATA SSD to 2.5" SATA Hard Drive Adapter

SKU CH-38YV-FXBZM

Converts B-key or B/M-key M.2 SATA SSDs to 2.5" SATA for broad system compatibility

  • Converts M.2 B/M-key SATA SSDs to 2.5" SATA form factor
  • Supports SATA 3.0 Gb/s interface for broad system compatibility
  • Works with select Lenovo E431, E531, X240, Y410P, Y510P models
  • Driver-free boot support across DOS, Windows 95/98/XP/7, Linux and Unix
  • Compact 6.1 × 4.09 × 0.39 inch plastic PCB design

Adapter for B-key and B/M-key M.2 SATA SSDs

This Vszerda adapter converts an M.2 NGFF SATA solid-state drive into a 2.5-inch SATA form factor. It accepts modules with a B-key or B/M-key edge connector and connects them to a standard SATA 3.0 Gb/s port. The board is designed for x86_64 platforms and requires no driver installation to function as a bootable system disk.

Suitable for upgrading laptops with M.2 SATA slots

Builders who have a compatible B-key or B/M-key M.2 SATA module can use this adapter to install it in a 2.5-inch bay or external enclosure. It does not accept M-key only modules, so users with those SSDs will need a different solution. The adapter draws up to 3 A at 3.3 V from the host system.

Keyed for B-key and B/M-key sockets only

The connector layout is the single specification that determines compatibility; the adapter physically and electrically supports only B-key or B/M-key M.2 SATA drives. M-key only modules cannot be used with this board.

Highlights

  • Converts M.2 B/M-key SATA SSDs to 2.5" SATA form factor
  • Supports SATA 3.0 Gb/s interface for broad system compatibility
  • Works with select Lenovo E431, E531, X240, Y410P, Y510P models
  • Driver-free boot support across DOS, Windows 95/98/XP/7, Linux and Unix
  • Compact 6.1 × 4.09 × 0.39 inch plastic PCB design

Specifications

No published specifications for this item yet.

Questions about this item

How much heat or power does the adapter add when the M.2 SATA SSD runs continuously?

The board draws power from the SATA 3.0 Gb/s link and passes 3.3 V at up to 3 A to the SSD, so any extra heat is limited to the drive itself.

What existing parts are required to install this adapter in a laptop or desktop?

You need a free 2.5" SATA drive bay with data and power cables, plus an M.2 B-key or B/M-key SATA SSD such as the E431, E531, X240, Y410P or Y510P models.

Will the adapter work alongside an older SATA II controller on the same motherboard?

Yes, the adapter uses the SATA 3.0 Gb/s interface which is backward compatible with earlier SATA revisions, so it will function on legacy controllers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.