We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 15cm cable with M.2 M-key male and Oculink SFF-8612 female connectors

Vszerda

Vszerda M.2 M-Key to Oculink SFF-8612 cable 15cm

SKU CH-C9KT-M1W1A

A 15 cm cable that adds an SFF-8612 OCuLink female port to an M.2 M-Key slot, carrying PCIe 4.0 at 64 Gbps for NVME SSDs or eGPUs

  • TypeOculink
  • ColorBlack
  • Speed64 gigabits_per_second
  • SpecificationsOculink
  • ShieldingHigh Speed
  • FeaturesHigh Speed
  • Adds an OCuLink SFF-8612 port to a 2280 M-Key slot
  • 15 cm cable supports PCIe 4.0 at 64 Gbps
  • Works with NVMe SSDs and eGPU graphics cards
  • Backward compatible with PCIe 3.0 devices
  • Includes fixing holes for secure mounting

M.2 M-Key to OCuLink SFF-8612 adapter for NVME

This 15cm cable adds an SFF-8612 female port to a 2280 M-Key slot, enabling NVME U.2 SSDs or external graphics cards. It suits compact hosts, desktops and laptops that lack native OCuLink connectivity. Fixing holes secure the bracket in tight chassis. The 67-pin male plug seats directly into the motherboard socket.

Sustained PCIe 4.0 throughput at 64 Gbps

The link runs at PCIe 4.0 speeds using the NVMe protocol, maintaining 64 Gbps during extended transfers rather than only in short bursts. Backward compatibility with PCIe 3.0 preserves function on older platforms. High-speed shielding protects signal integrity across the full length under continuous load.

Black shielded cable with screw-mount brackets

The black OCuLink cable uses high-speed shielding to reject interference in dense builds. Both ends feature fixing holes so the SFF-8612 bracket and M.2 plug stay locked during vibration or cable routing. The short 15cm run minimises latency while keeping the external device close to the host.

Highlights

  • Adds an OCuLink SFF-8612 port to a 2280 M-Key slot
  • 15 cm cable supports PCIe 4.0 at 64 Gbps
  • Works with NVMe SSDs and eGPU graphics cards
  • Backward compatible with PCIe 3.0 devices
  • Includes fixing holes for secure mounting

Specifications

BrandVszerda
TypeOculink
ColorBlack
Speed64 gigabits_per_second
SpecificationsOculink
ShieldingHigh Speed
FeaturesHigh Speed

Questions about this item

Does the 15cm M.2-to-Oculink cable generate noticeable heat or draw extra power during all-day NVMe SSD or eGPU use?

The cable is a passive 15 cm trace carrying PCIe 4.0 signals at up to 64 Gbps; it adds no active components, so heat and power draw are negligible.

What must my system already provide for the 67-pin M.2 M-key male connector to work with this adapter?

An available 2280 M-key slot wired for PCIe 3.0 or 4.0 with NVMe support; the host supplies all signalling and power.

Will the SFF-8612 female port work with my older PCIe 3.0 expansion chassis or U.2 backplane?

Yes, the Oculink interface is backward compatible with PCIe 3.0, so existing Gen 3 devices connect at their native speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.