We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with USB-A plug and M.2 slot

Vszerda

Vszerda M.2 B+M Key SATA SSD to USB 3.0 Adapter 2280

SKU CH-QG9J-R2G19

Connects a 2280 M.2 SATA SSD via USB 3.0 at 5 Gbps for cloning or data recovery, no cable or driver needed

  • Clones or retrieves data with direct M.2 SATA SSD access
  • No separate USB cable required for simpler connections
  • 5 Gbps transfer rate via USB 3.0 interface
  • Works with Windows, macOS and Linux without drivers
  • Includes screwdriver for secure SSD installation

M.2 SATA B+M Key Adapter

This adapter connects a 2280 M.2 SATA SSD with B+M keying to a USB 3.0 port for data recovery or cloning tasks. It is designed for users who need temporary access to a SATA-based M.2 drive without installing it internally. The device is not compatible with B-key only SATA SSDs or any M-key NVMe/AHCI drives.

Included Screwdriver and Cable-Free Design

A small screwdriver is supplied to secure the SSD onto the adapter board. The adapter plugs directly into a USB port without requiring a separate cable, reducing clutter and the chance of a missing lead. No drivers are needed for Windows XP through 10, macOS, or Linux systems.

USB 3.0 5Gbps Transfer Limit

The USB 3.0 interface caps throughput at 5Gbps, which is ten times faster than USB 2.0 and backward compatible with USB 2.0 and 1.0 ports. This bandwidth suits cloning or file retrieval from SATA SSDs but will not saturate faster NVMe drives, which this adapter does not support.

Highlights

  • Clones or retrieves data with direct M.2 SATA SSD access
  • No separate USB cable required for simpler connections
  • 5 Gbps transfer rate via USB 3.0 interface
  • Works with Windows, macOS and Linux without drivers
  • Includes screwdriver for secure SSD installation

Specifications

No published specifications for this item yet.

Questions about this item

Will the B+M key SATA SSD connector wear out after repeated insertions?

The adapter uses a standard M.2 B+M key SATA slot rated for typical insertion cycles; the included screwdriver helps secure the drive to reduce connector stress.

Does the USB 3.0 interface limit sustained transfer speeds with a SATA SSD?

Yes, the USB 3.0 link caps at 5 Gbps, so a SATA SSD that can exceed this will hit the interface ceiling first during large sequential transfers.

Does the adapter get hot or draw extra power when running all day?

The bare PCB design has no active cooling; it draws power only from the USB port and stays cool under normal SATA SSD workloads.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.