We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda LPSFF8654-8I74P-2POC11-4I38P SAS cable 100cm

SKU CH-SV4F-BKE5A

Connects SAS 4.0 SFF-8654 74-pin to dual OCuLink 8611 38-pin ports with PCI-E 5.0 compliance and locking latches

  • TypeMINI SAS
  • ColorMulticolored
  • Length18
  • Connector DetailSas Sff-8654 to Oculink 8611
  • Terminal GenderMale-to-Male
  • SpecificationsMINI SAS
  • SAS 4.0 and PCI-E 5.0 compliant for enterprise reliability
  • 100 cm length with 90-degree low-profile connectors fits dense chassis
  • High-purity OFC conductors and Aluminum Mylar shielding reduce EMI
  • Locking latch connectors prevent accidental disconnection under load
  • Splits one SFF-8654 8i 74P port to two OCulink 8611 4i 38P ports

Enterprise SAS Adapter Cable

This cable connects a Slimline SFF-8654 74-pin port to two OCuLink 8611 38-pin ports for high-speed storage links. It is built for enterprise servers, RAID controllers and virtualization clusters that require PCI-E 5.0 and SAS 4.0 compliance. The 100cm length suits rack-to-rack or intra-chassis routing in dense 90-degree layouts.

Verify Connector Layout Before Ordering

Confirm your controller exposes a single SFF-8654 8i 74-pin receptacle and that the target backplane or enclosure accepts two OCuLink 8611 4i 38-pin plugs. Check that the low-profile 90-degree hood fits the available clearance around adjacent cards or drive cages. Ensure the male-to-male gender matches both ends of your intended link.

Locking Latch and Shielding Improve Reliability

Premium aluminum Mylar wrap and high-purity OFC conductors reduce EMI in electrically noisy racks. The integrated locking latches resist accidental unplugging during vibration or maintenance cycles. These features support continuous uptime in backup, replication and virtual machine workloads without adding software or active components.

Highlights

  • SAS 4.0 and PCI-E 5.0 compliant for enterprise reliability
  • 100 cm length with 90-degree low-profile connectors fits dense chassis
  • High-purity OFC conductors and Aluminum Mylar shielding reduce EMI
  • Locking latch connectors prevent accidental disconnection under load
  • Splits one SFF-8654 8i 74P port to two OCulink 8611 4i 38P ports

Specifications

BrandST-JY
ModelLPSFF8654-8I74P-2POC11-4I38P
TypeMINI SAS
ColorMulticolored
Length18
Connector DetailSas Sff-8654 to Oculink 8611
Terminal GenderMale-to-Male
SpecificationsMINI SAS
ShieldingHigh-speed transfer, 90-degree design, locking latch connectors, premium shielding
FeaturesHigh-speed transfer, 90-degree design, locking latch connectors, premium shielding

Questions about this item

Does the package include any mounting brackets or drive trays, or must those be purchased separately?

The cable itself is the only item supplied; brackets, trays or other mounting hardware are not included and must be sourced separately.

How do I decide between the SFF-8654 8i 74P end and the dual Oculink 8611 4i 38P ends for my server?

Use the 74-pin SFF-8654 connector on the RAID controller or backplane side and the two 38-pin Oculink 8611 connectors on the storage device side; the cable is built for that fixed 8i-to-2×4i layout.

What does the PCI-E 5.0 and SAS 4.0 compliance mean for real-world throughput in my array?

The cable supports the full PCI-E 5.0 and SAS 4.0 signalling rates across all lanes, so your RAID controller and drives can run at their maximum supported speeds without cable-imposed bottlenecks.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.