We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
M.2 NVMe eGPU bracket with 50cm PCIe 4.0 x4 riser cable

Vszerda

Vszerda K43SG M.2 NVMe eGPU bracket 64G/s 50cm cpu accessory

SKU CH-CP45-26DHY MPN K43SG

M.2 NVMe bracket with PCIe 4.0 x4 riser cable for graphics cards from 1660 onward, 64 G/s bandwidth, 50 cm length, requires separate 12 V 18 A or ATX power and Windows 10 1909+

  • 64G/s PCIe 4.0 x4 bandwidth for full GPU speed
  • 50 cm riser cable fits tight notebook or NUC builds
  • Works with graphics cards from 1660 and newer
  • Requires 12 V 18 A 220 W or ATX power supply
  • Windows 10 1909 or higher needed for GPU recognition

M.2 NVMe GPU bracket for 2015+ cards

The Vszerda K43SG is an M.2 M Key NVMe bracket that adds external graphics support to notebooks, ITX or STX boards and NUC units. It carries a PCIe 4.0 x4 riser cable rated at 64 G/s bandwidth and measures 50 cm in length. The adapter is built for GPUs released after 2015 and works stably with models from the 1660 series upward.

Not for older GPUs or non-NVMe M.2 slots

Builders with graphics cards shipped before 2014 will find this bracket incompatible, as will anyone whose system only offers M.2 SATA, M.2 WiFi, M.2 WWAN or USB interfaces. The host must run Windows 10 version 1909 or higher, otherwise the connected GPU will not be recognised. A separate 12 V 18 A 220 W power supply or a standard ATX unit is also required.

PCIe 4.0 x4 riser at 64 G/s bandwidth

The single specification that determines fit is the 64 G/s PCIe 4.0 x4 link provided by the 50 cm riser cable. If the laptop or small-form-factor board exposes an M.2 M Key NVMe slot and the GPU is a 1660 or newer, this bracket delivers full-speed external graphics; otherwise it will not function.

Highlights

  • 64G/s PCIe 4.0 x4 bandwidth for full GPU speed
  • 50 cm riser cable fits tight notebook or NUC builds
  • Works with graphics cards from 1660 and newer
  • Requires 12 V 18 A 220 W or ATX power supply
  • Windows 10 1909 or higher needed for GPU recognition

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the K43SG is running at the advertised 64G/s bandwidth after installation?

Confirm the host system shows a PCIe 4.0 x4 link and that the GPU is recognised in Windows 10 1909 or later; the bracket itself has no onboard indicator.

What is included with the K43SG and what must I source separately?

The bracket and a 50 cm PCIe 4.0 x4 riser cable are supplied; a 12 V 18 A 220 W power supply or a standard ATX PSU must be purchased separately.

Which graphics cards are compatible with the K43SG M.2 NVMe bracket?

Cards released after 2015 such as the 1660 and newer are supported; older cards shipped before 2014 are not compatible.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.