We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and blue 1 metre cable with SFF-8643 plug fanning out to four SFF-8482 connectors and a 15-pin power port

Vszerda

Vszerda Internal Mini SAS SFF-8643 to 4×29pin SFF-8482 with 15pin Power, 1M

SKU CH-589Y-63WZD

Connects an SFF-8643 controller to four SFF-8482 drives with integrated 15-pin power over a 1-metre shielded cable

  • Typemini sas
  • ColorBlack & Blue.
  • Length1
  • Connector Number152
  • Connector DetailSas
  • Terminal GenderMale-to-Male
  • Connects one SFF-8643 host to four SFF-8482 drives with integrated 15-pin power
  • 1-metre fan-out cable carries data and power in a single run
  • 30 AWG high-speed shielding protects signal integrity over the full length
  • Male-to-male SFF-8643 to SFF-8484 layout matches controller-based RAID cards
  • Black and blue colour coding aids quick port identification in dense chassis

Cable purpose and fit

This internal fan-out cable connects a Mini SAS SFF-8643 host port on a motherboard or RAID controller to four 29-pin SFF-8482 drive connectors with a 15-pin SAS power port. It is built for installers who need to break out a single x4 controller link into four individual SAS or SATA disk attachments.

Deciding specification

The host end uses the SFF-8643 interface; the cable will not work with SFF-8645 backplane ports. Buyers must verify that their controller presents an SFF-8643 receptacle before ordering.

Capacity and headroom

The one-metre, 30 AWG assembly carries high-speed SAS signals to four drives simultaneously. It covers typical chassis routing distances but offers no extra length for full-tower or external enclosure runs.

Highlights

  • Connects one SFF-8643 host to four SFF-8482 drives with integrated 15-pin power
  • 1-metre fan-out cable carries data and power in a single run
  • 30 AWG high-speed shielding protects signal integrity over the full length
  • Male-to-male SFF-8643 to SFF-8484 layout matches controller-based RAID cards
  • Black and blue colour coding aids quick port identification in dense chassis

Specifications

BrandVszerda
Typemini sas
ColorBlack & Blue.
Length1
Connector Number152
Connector DetailSas
Terminal GenderMale-to-Male
Specificationsmini sas
ShieldingHigh Speed
FeaturesHigh Speed

Questions about this item

What does the SFF-8643 x4 host connector mean for drive connections?

The SFF-8643 host end splits into four individual SFF-8482 connectors, letting one controller port address four SAS or SATA drives.

How does the 30 AWG cable affect signal integrity at 1 metre?

The 30 AWG construction is rated for high-speed SAS signalling across the 1 metre length without additional equalisation.

What clearance does the 15-pin power port need inside the chassis?

The integrated 15-pin power connector sits beside the four data plugs, so allow enough width for all five heads to seat side by side.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.