We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Mini SAS SFF-8087 cable splitting to four SATA connectors with black mesh sleeve

Vszerda

Vszerda Internal Mini SAS SFF-8087 to 4 SATA Forward Breakout Cable 1.64ft

SKU CH-J5BN-QR12J

Connects a SFF-8087 controller to four SATA drives at up to 6Gbps per port with a 1.64ft blue cable

  • Connects SFF-8087 controller to four SATA drives
  • Supports 6Gbps transfer rate per SATA port
  • 64ft length fits compact server chassis
  • Latch-locking connectors secure each connection
  • Woven mesh sleeve protects half the cable

Mini SAS SFF-8087 breakout cable

This Vszerda cable connects a RAID or PCIe controller with an SFF-8087 port to four discrete SATA drives. It is built for internal server or workstation storage arrays where a single controller port must fan out to multiple target devices. The forward breakout design carries data from the host connector to four SATA backplane or drive connectors. Each path supports up to 6Gbps transfer speed per drive.

Replaces loose SATA cables from controller

The assembly consolidates four individual SATA leads into one managed harness with a locking SFF-8087 host plug. P1 to P4 markers on the cable ends provide quick port identification after installation. The jump is worth it when a controller offers a single 8087 interface but the chassis requires four separate SATA connections to a backplane or drive cage. A woven mesh sheath covers half the 1.64ft length to aid routing and reduce clutter.

Fits standard SFF-8087 host ports

The male SFF-8087 connector with latch locking mates with compatible host bus adapters or RAID cards that present this interface. Four female SATA connectors with latch locking attach directly to SATA hard drives or backplane ports. The cable frees up expansion slots by using one controller port for four drives instead of requiring multiple controller cards or ports. Compatible HBAs can span arrays across two PCIe 2.0 x8 lanes when the host hardware supports that topology.

Highlights

  • Connects SFF-8087 controller to four SATA drives
  • Supports 6Gbps transfer rate per SATA port
  • 64ft length fits compact server chassis
  • Latch-locking connectors secure each connection
  • Woven mesh sleeve protects half the cable

Specifications

No published specifications for this item yet.

Questions about this item

What clearance does the SFF-8087 male connector with latch locking require on the host side?

The SFF-8087 male plug with latch locking needs enough depth to seat fully and room for the latch to engage; allow space for the 1.64ft cable run and the woven mesh sheath that covers half its length.

Which step is often missed when connecting the four SATA female connectors to the drives?

Each SATA female connector has latch locking — push until the latch clicks, then verify the P1 to P4 markers match the intended drive order so the RAID array maps correctly.

What should be checked periodically on the SFF-8087 to 4 SATA breakout cable?

Inspect the latch locks on both the SFF-8087 and the four SATA ends for secure engagement, and examine the blue cable and black sleeved sections for abrasion or kinks that could affect the 6Gbps per port signal.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.