We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda Mini SAS SFF-8643 to four SATA cable, .5 m length, black connectors

Vszerda

Vszerda Internal HD Mini SAS Cable 0.5M / 1.6FT SFF-8643 to 4X SATA Cable

SKU CH-CCRS-635Y2

Connects a Mini SAS SFF-8643 host to four SATA drives over a 0.5 m 1.6 ft cable

  • Connect four SATA drives to one SFF-8643 port
  • 5 m length keeps internal routing tidy
  • SFF-8643 host connector fits modern RAID controllers
  • Supports 12 Gb SAS throughput for fast data access
  • Hybrid cable design eases 6 Gb to 12 Gb transition

Cable purpose and audience

This SFF-8643 to 4x SATA cable connects a Mini SAS host port on a motherboard or RAID controller to four SATA hard drives. It suits builders adding multiple drives to a server or workstation that uses an internal SFF-8643 connector.

Who it fits and who it does not

The cable works when the SFF-8643 port is on the host side such as a controller card or motherboard header. It will not work if the SFF-8643 connector sits on a backplane or drive enclosure because the signal direction is reversed.

Checks before ordering

Verify that your motherboard or RAID controller provides an SFF-8643 host port and that the 0.5 m length reaches your drive bays. Confirm each target drive uses a standard SATA data connector and that no backplane sits between the controller and the drives.

Highlights

  • Connect four SATA drives to one SFF-8643 port
  • 5 m length keeps internal routing tidy
  • SFF-8643 host connector fits modern RAID controllers
  • Supports 12 Gb SAS throughput for fast data access
  • Hybrid cable design eases 6 Gb to 12 Gb transition

Specifications

No published specifications for this item yet.

Questions about this item

What controller or motherboard port must I already have to plug in the SFF-8643 end?

You need a Mini SAS SFF-8643 host port on your motherboard or RAID controller.

Will this cable work if I keep my existing SATA hard drives?

Yes, the four 7-pin SATA connectors attach directly to standard SATA hard drives.

How can I verify the link is running at 12 Gb after installation?

Check the controller BIOS or OS utility for a negotiated 12 Gb link speed on each attached drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.