We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular PoE splitter with Ethernet port and micro USB output cable

Vszerda

Vszerda IEEE 802.3af Micro USB PoE Splitter 48V to 5V 2.4A

SKU CH-3DC9-MDN9B

Converts 44-57V PoE to 5V 2.4A micro USB power for tablets, Dropcam or Raspberry Pi up to 150m

  • Delivers 12 W over Ethernet up to 150 m
  • Converts 44–57 V PoE to 5 V 2.4 A Micro USB
  • Built-in overvoltage protection for safe operation
  • Works with IEEE 802.3 af switches or 48 V injectors
  • Powers Raspberry Pi, Dropcam or Android tablets

PoE Splitter for Micro USB Devices

This active splitter converts 802.3af Power over Ethernet to a 5V 2.4A Micro USB output, delivering up to 12 watts. It is designed for tablets, Dropcam units and Raspberry Pi 2 or 3B+ boards that require Micro USB power. An 802.3af PoE switch or 48V injector is required to supply the input voltage.

12-Watt Capacity and 100-150m Reach

The unit accepts 44-57V DC input with overvoltage protection and provides a steady 5V 2.4A stream for compatible low-power devices. Power travels over standard Ethernet cable up to 328-492ft (100-150m) from the source. Devices drawing more than 12 watts or requiring a different connector will exceed the splitter's rating.

Micro USB Output Connector

The sole power output is a Micro USB plug, fixing the physical interface for the target device. Builders needing USB-C, barrel jack or bare-wire connections must use a different adapter. The splitter is limited to 100 Mbps Ethernet passthrough; gigabit PoE switches require the separate U515902 model.

Highlights

  • Delivers 12 W over Ethernet up to 150 m
  • Converts 44–57 V PoE to 5 V 2.4 A Micro USB
  • Built-in overvoltage protection for safe operation
  • Works with IEEE 802.3 af switches or 48 V injectors
  • Powers Raspberry Pi, Dropcam or Android tablets

Specifications

No published specifications for this item yet.

Questions about this item

Will this splitter power a Raspberry Pi 3B+ if I keep using my 100 m Cat5e run from an 802.3af switch?

Yes, the splitter delivers 5 V at 2.4 A over 100-150 m from an 802.3af PoE switch or 48 V injector, matching the Pi 3B+ Micro USB input.

How can I confirm the splitter is regulating 5 V correctly once installed?

Measure the Micro USB output with a multimeter under load; it should read 5 V while the connected device operates normally.

Does the package include the Ethernet cable and PoE injector, or must I buy them separately?

Only the splitter is included; a Cat5e or better Ethernet cable and an 802.3af PoE switch or 48 V injector are required separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.