We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black right-angled IEC C14 male to C13 female power adapter with 90-degree bend

Vszerda

Vszerda IEC60320 C14 to C13 90 Degree Right Angled Power Extension Cord

SKU CH-DBKJ-74RTZ

A right-angled IEC 60320 C14 to C13 adapter rated for 10 A at 250 V, designed for tight spaces behind PCs or monitors

  • FeaturesThis power extension cord is made by NGFF and features a Rig
  • Fits tight spaces with 90-degree right-angled IEC 60320 C14 to C13 design
  • Handles 10 A at 250 V for reliable power delivery to PCs and monitors
  • UL-listed construction meets recognised safety requirements
  • Standard three-pole C13 female mates with common desktop PSU and monitor inputs
  • C14 male plug connects directly to C13 sockets on equipment or PDU strips

Right-Angle IEC 60320 Adapter

The Vszerda adapter is a new IEC 60320 C14 male to C13 female power extension cord with a fixed 90-degree right-angle moulding. It reroutes the cable close to the chassis so the cord runs parallel to the rear panel instead of projecting straight out. The black connector pair is UL listed and rated for 250 V at 10 A.

Builders with tight rear clearance

The right-angle body suits PC builders, rack installers and monitor users whose equipment sits flush against a wall or inside a shallow cabinet where a straight C13 plug would foul the surface. Installations that need the cable to exit upward, downward or left instead of right should choose a differently oriented adapter or a straight cord.

Fixed 90-degree exit direction

The single specification that decides fit is the moulded 90-degree angle, which dictates the exact cable exit direction relative to the equipment inlet. Because the angle cannot be rotated, the buyer must verify that the required routing matches this fixed orientation before purchasing.

Highlights

  • Fits tight spaces with 90-degree right-angled IEC 60320 C14 to C13 design
  • Handles 10 A at 250 V for reliable power delivery to PCs and monitors
  • UL-listed construction meets recognised safety requirements
  • Standard three-pole C13 female mates with common desktop PSU and monitor inputs
  • C14 male plug connects directly to C13 sockets on equipment or PDU strips

Specifications

BrandNGFF
ModelPW-031-RI-NG
FeaturesThis power extension cord is made by NGFF and features a Right Angled style with material. It supports a voltage of and an input current of . The cable is Black C14-C13 in color and is UL listed. It comes with a connector and does not require batteries.

Questions about this item

Which orientation of the 90-degree angle suits my equipment?

The C14 male plug bends 90 degrees from the C13 female socket. Check whether the cable needs to exit upward, downward, left or right relative to the device port before ordering.

What does the 10A 250V rating mean for my PC or monitor?

It certifies the adapter for up to 10 amps at 250 volts AC, covering typical desktop PSUs and monitors that draw well under that limit.

How does the IEC 60320 C14-to-C13 interface limit what I can connect?

The C14 plug fits only C13 inlets and the C13 socket accepts only C14 plugs, so the adapter works exclusively with equipment using that three-pin IEC 60320 pair.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.