We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black IEC C14 to C13 90 degree up-angled power adapter

Vszerda

Vszerda IEC 60320 C14 to C13 90° Up Angled Power Extension Cord

SKU CH-BDCK-9VDKP

A compact 90-degree angled adapter connects IEC C14 to C13 ports, rated 10 A at 250 V for tight spaces

  • TypePW-031-UP-NG
  • Length2 centimeters
  • Connector DetailPW-031-UP-NG
  • Terminal GenderPW-031-UP-NG
  • SpecificationsPW-031-UP-NG, 2, centimeters, 11 L x 11 W x 1 H centimeters,
  • 90° angled connector fits tight spaces behind equipment
  • IEC 60320 C14 male to C13 female connects standard PC power leads
  • Rated for 10 A at 250 V for reliable power delivery
  • Compact 2 cm length keeps cable runs short and tidy
  • Upward exit routes cable away from adjacent ports

IEC C14 to C13 angled adapter

This short adapter converts a standard IEC C14 inlet into an upward-facing C13 outlet with a 90-degree bend. It is designed for builders and technicians who need to route a kettle lead away from a crowded rear panel or tight rack space. The compact 2-centimetre body adds minimal depth while changing the cable exit direction.

Upward 90-degree exit orientation

The single deciding specification is the upward-angled 90-degree configuration that directs the connected cable toward the top of the device. If the equipment layout requires the lead to run downward, sideways or straight back, this adapter will not suit the installation.

10 A at 250 V headroom

Rated for 10 amps at 250 volts, the adapter comfortably powers typical desktop PCs, monitors and network gear that use IEC C13 cords. It runs out of headroom for high-current devices such as large workstations or redundant power supplies that draw more than 10 amps continuous.

Highlights

  • 90° angled connector fits tight spaces behind equipment
  • IEC 60320 C14 male to C13 female connects standard PC power leads
  • Rated for 10 A at 250 V for reliable power delivery
  • Compact 2 cm length keeps cable runs short and tidy
  • Upward exit routes cable away from adjacent ports

Specifications

BrandNGFF
ModelPW-031-UP-NG
TypePW-031-UP-NG
Length2 centimeters
Connector DetailPW-031-UP-NG
Terminal GenderPW-031-UP-NG
SpecificationsPW-031-UP-NG, 2, centimeters, 11 L x 11 W x 1 H centimeters, 11 grams, One Year Manufacturer

Questions about this item

What does the 90° up angle actually do once the adapter is plugged into my equipment?

It routes the cable vertically so the lead exits upward, letting you fit the connector into a C13 inlet even when rear clearance is only a few centimetres.

What does the IEC 60320 C14-to-C13 interface cap at in practice?

The connector pair is rated for 10 A at 250 V, so the adapter will pass up to that current and voltage without overheating.

How much space do I need behind the device for this 2 cm adapter to sit flush?

The moulded body measures roughly 11 cm long, 11 cm wide and 1 cm high, so allow at least that much depth behind the C13 socket.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.