Vszerda
Vszerda IEC 320 C14 to C13 90 Degree Down Angled Power Adapter 10A 250V
A 90-degree down-angled IEC 320 C14 to C13 adapter rated 10A at 250V for tight spaces behind monitors, PDUs or printers
- SpecificationsVoltage: 250 volts
- Fits tight spaces with 90 degree down angle
- Handles 10A at 250V for reliable power
- Connects IEC 320 C14 male to C13 female
- Compact 3.94 inch design weighs 1.41 ounces
- Works with PDU, UPS, servers and peripherals
Right-angle IEC C14-C13 adapter for tight spaces
This Vszerda adapter converts a standard IEC 320 C14 inlet to a C13 outlet with a 90-degree downward bend. It suits anyone routing power cables behind racks, monitors, printers or PDU chassis where straight connectors would foul adjacent equipment or panels. The 10 A, 250 V rating covers typical office and lab loads.
Simple plug-in fit, check orientation first
Installation is a straight push onto the existing C14 inlet and the device C13 plug; no tools or wiring are required. The only common issue is picking the wrong bend direction, so verify which way the cable must exit before ordering. The compact 3.94 x 3.94 x .39 inch body adds minimal depth.
Handles 10 A continuous, stops at that limit
The connector comfortably carries the full 10 A at 250 V for servers, UPS units, laptop bricks or peripherals such as printers. It cannot supply higher-current loads such as heavy workstation PSUs or EV chargers that exceed the 10 A rating.
Highlights
- Fits tight spaces with 90 degree down angle
- Handles 10A at 250V for reliable power
- Connects IEC 320 C14 male to C13 female
- Compact 3.94 inch design weighs 1.41 ounces
- Works with PDU, UPS, servers and peripherals
Specifications
| Brand | chenyang |
|---|---|
| Model | CY-PW-031-DN |
| Specifications | Voltage: 250 volts |
Questions about this item
How can I confirm the 90 degree down angled adapter is seated correctly after plugging it into my C14 inlet?
The IEC 320 C13 female end should lock firmly onto the C14 male inlet with no visible gap; the down angled body will then point the attached cable downward, clearing nearby obstacles.
What comes in the package and do I need a separate power cord?
The box contains one Vszerda C14 to C13 90 degree down angled adapter weighing 1.41 ounces; you must supply the C13 ended power cord that connects from the adapter to your wall outlet or PDU.
Which version should I choose if my equipment rack has only 0.39 inches of clearance above the C14 port?
This down angled model (CY-PW-031-DN) measures 3.94 by 3.94 by 0.39 inches and directs the cable downward, making it the correct choice for tight vertical clearance above the inlet.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00113914BTC
In stock
