We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter board with 40-pin IDE and SATA 7+15 connectors, 4-pin power, 2.6cm wide

Vszerda

Vszerda IDE to SATA Adapter 7+15 Pin 3.5/2.5" Wide Board

SKU CH-PYW4-6SBWB

Converts 3.5 or 2.5 inch SATA drives to PATA IDE using a 40-pin data connector, 7+15-pin power and data interface, and supports ATA 100/133 speeds

  • ColorWide board
  • Conductorcopper
  • Connects SATA drives to IDE motherboards using 7+15 pin female SATA and male IDE connectors
  • Supports both 3.5 and 2.5 inch SATA hard drives and optical drives
  • Enables ATA 100/133 transfer rates for legacy system compatibility
  • Wide board design measures 2.6 cm for secure installation
  • Plug-and-play operation requires no driver installation

Wide-board IDE-SATA adapter

This Vszerda adapter converts a SATA 7+15 port to a 40-pin PATA IDE interface so a 3.5-inch or 2.5-inch SATA hard drive or optical drive can connect to an older IDE motherboard header. It is built on a 2.6 cm wide green PCB with copper conductors and includes a 4-pin Molex power connector. The unit weighs 20 g and supports ATA 100/133 speeds.

Plug-and-play with enclosure limitation

Installation requires no drivers; simply attach the SATA data and power connectors to the drive, plug the 40-pin IDE end into the motherboard and connect the Molex lead to the power supply. The wide board may not fit inside tight external drive enclosures, so verify internal clearance before ordering. The adapter cannot be used with external hard drive enclosures.

Bidirectional ATA 100/133 support

The single specification that decides compatibility is the supported transfer mode: ATA 100/133. Drives or controllers limited to slower PIO modes will work but will not reach the adapter's maximum throughput, while systems requiring Ultra DMA modes beyond 133 are not supported.

Highlights

  • Connects SATA drives to IDE motherboards using 7+15 pin female SATA and male IDE connectors
  • Supports both 3.5 and 2.5 inch SATA hard drives and optical drives
  • Enables ATA 100/133 transfer rates for legacy system compatibility
  • Wide board design measures 2.6 cm for secure installation
  • Plug-and-play operation requires no driver installation

Specifications

BrandVszerda
ColorWide board
Conductorcopper

Questions about this item

How do I confirm the Vszerda IDE to SATA adapter is working after connecting it?

After setup, the system BIOS or operating system should detect the attached drive at ATA 100/133 speeds, confirming the adapter is functioning.

What comes in the box with the Vszerda Wide Board adapter and what extra parts are needed?

The package includes one SATA 7+15 to PATA IDE adapter converter; you must supply a 4-pin Molex power connector and a 40-pin IDE cable separately.

Which board width should I choose for the Vszerda adapter, 2.6 cm or 1.7 cm?

Select the 2.6 cm Wide Board version if your drive bay or motherboard layout needs the larger footprint; choose the 1.7 cm Narrow Board for tighter spaces.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.