We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black dual 4-pin Molex to 6-pin PCIe power adapter cable with sleeved wires

Vszerda

Vszerda HX-SA-027 Dual 4Pin to PCIe 6Pin Power Adapter Cable

SKU CH-716T-4P8GH

Converts two IDE 4-pin connectors into a single PCIe 6-pin plug for graphics cards, supporting 5 V and 12 V rails

  • TypeATX
  • Connector DetailMale-to-Female
  • SpecificationsConnector: Male-to-Female
  • Connects modern PCIe graphics cards to legacy power supplies
  • Dual IDE 4-pin plugs draw from separate PSU rails for stable 12 V delivery
  • Male-to-female design enables quick installation without tools
  • Supports both 5 V and 12 V lines for broad compatibility
  • Adapter lets older ATX units power newer EPS 12 V cards

Purpose and fit

The Vszerda HX-SA-027 adapts two IDE 4-pin power connectors into a single PCIe 6-pin plug for graphics cards. It lets builders keep an older or non-PCIe power supply when adding a card that requires a 6-pin connection. The cable carries both 5 V and 12 V lines from the supply to the card.

Thermals and power draw

The adapter passes through the power supply’s existing 5 V and 12 V rails without active components. Heat and noise therefore depend entirely on the PSU and the graphics card rather than on the cable itself. No additional power draw is introduced beyond the card’s normal consumption.

Build and daily use

Male-to-female connectors lock securely into standard IDE and PCIe sockets. Using two separate IDE lines from the power supply helps balance the load across rails. The short cable run keeps cable routing tidy inside the case and avoids blocking adjacent expansion slots.

Highlights

  • Connects modern PCIe graphics cards to legacy power supplies
  • Dual IDE 4-pin plugs draw from separate PSU rails for stable 12 V delivery
  • Male-to-female design enables quick installation without tools
  • Supports both 5 V and 12 V lines for broad compatibility
  • Adapter lets older ATX units power newer EPS 12 V cards

Specifications

BrandVszerda
ModelHX-SA-027
TypeATX
Connector DetailMale-to-Female
SpecificationsConnector: Male-to-Female

Questions about this item

How do I connect the dual 4-pin IDE plugs to the power supply without overloading one rail?

Plug each 4-pin connector into a separate PSU cable run so the load splits across two rails.

Will the adapter itself degrade or need replacement over time?

The cable has no moving parts; only the connectors can wear if repeatedly mated.

What power limit appears first when the graphics card draws sustained load?

The pair of IDE 4-pin feeds and the PSU rails behind them cap total delivery.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.