We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda HDMI to HDMI + 3RCA CVBS Audio Video Converter

SKU CH-T9TZ-Q734T

Converts one HDMI source to simultaneous HDMI and composite video with stereo audio, supporting 1080p60 input and PAL/NTSC output

  • Converts digital HDMI to analog CVBS composite video and stereo audio for legacy displays
  • Splits one HDMI source to simultaneous HDMI pass-through and 3RCA output without signal loss
  • Plug-and-play operation with no driver installation required for immediate setup
  • Supports PAL and NTSC TV standards plus HDCP protocol for broad device compatibility
  • Accepts 1080p 60 Hz input and common DVI resolutions up to 1920 x 1080 at 60 Hz

Signal conversion

The Vszerda adapter converts a single HDMI source into simultaneous HDMI pass-through and composite CVBS video with stereo audio output. It accepts digital signals up to 1080p at 60 Hz and translates them to analogue 576i or 480i for legacy displays. No driver installation is required and the unit supports both PAL and NTSC television standards. HDCP-protected content passes through the HDMI output.

Use-case fit

This converter suits owners of VHS recorders, DVD recorders, set-top boxes, Xbox 360 or PS3 consoles who need to view or capture HDMI sources on composite-only equipment. It is not intended for users who require an upscaler that turns analogue RCA or CVBS signals into digital HDMI. Buyers wanting component, S-Video or RF outputs should consider a different device.

Deciding specification

The HDMI input handles 1080p at 60 Hz alongside 1080i, 720p, 576p and 480p, plus DVI-mode resolutions such as 1920x1080, 1280x1024, 1280x720, 1024x768 and 800x600. The composite CVBS output is limited to 576i or 480i, while the HDMI output mirrors the input at up to 1080p60. Match your source resolution and desired output format to these limits before purchasing.

Highlights

  • Converts digital HDMI to analog CVBS composite video and stereo audio for legacy displays
  • Splits one HDMI source to simultaneous HDMI pass-through and 3RCA output without signal loss
  • Plug-and-play operation with no driver installation required for immediate setup
  • Supports PAL and NTSC TV standards plus HDCP protocol for broad device compatibility
  • Accepts 1080p 60 Hz input and common DVI resolutions up to 1920 x 1080 at 60 Hz

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the Vszerda converter and what step do people often miss?

Connect the power cable first, then plug the HDMI source into the input and the TV or recorder into the RCA and HDMI outputs; the most common mistake is skipping the power connection and getting no signal.

What part of the Vszerda converter will need replacement first under normal use?

The internal power supply or HDMI port typically fails before the RCA jacks, so keep the power adapter and cables strain-relieved to extend service life.

What resolution limit appears first when the Vszerda converter runs continuously?

The CVBS output is capped at 576i, so extended sessions will always downscale 1080p sources to that interlaced composite ceiling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.