We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black HDMI splitter box with one input and two output ports

Vszerda

Vszerda HDMI Splitter 1 in 2 Out 4K@60Hz HDMI 2.0 EDID

SKU CH-RGAT-B7QF7

Splits one HDMI source to two displays at 4K 60 Hz with HDCP 2.2 and selectable EDID modes

  • Splits one source to two 4K@60Hz displays
  • Mirror and Extend modes via Windows+P shortcut
  • 18Gbps bandwidth carries 30/36/48-bit deep colour
  • HDCP 2.2 compliant for protected 4K content
  • EDID management with four selectable modes

1-in-2 HDMI Splitter for Dual Displays

This Vszerda splitter takes one HDMI source and sends the same signal to two displays simultaneously. It supports HDMI 2.0 and resolutions up to 3840x2160 at 60Hz. The unit handles 30, 36 and 48 bit deep colour and passes high-bit-rate audio formats such as DTS-HD and Dolby TrueHD. It is suited for users who need identical output on two screens from a single source.

Upgrade from Single-Output or 30Hz Limits

The device replaces a direct one-to-one cable or an older splitter capped at 30Hz, adding 60Hz 4K capability and HDCP 2.2 compliance. The jump is worth it when the source and both displays support 4K at 60Hz and you require simultaneous duplicate output without manual cable swapping. It also adds EDID management with four selectable modes for broader handshake reliability.

4K60 Bandwidth and Colour Headroom

The 18Gbps bandwidth and 1536MHz clock comfortably carry 4K at 60Hz with full RGB 4:4:4 sampling and deep colour up to 48 bit. It runs out when the source demands higher refresh rates at 4K, greater colour depth than 48 bit, or audio formats beyond the listed DTS-HD, Dolby TrueHD, DTS, Dolby AC3 and DSD HD HBR. Both connected displays will always show the same picture.

Highlights

  • Splits one source to two 4K@60Hz displays
  • Mirror and Extend modes via Windows+P shortcut
  • 18Gbps bandwidth carries 30/36/48-bit deep colour
  • HDCP 2.2 compliant for protected 4K content
  • EDID management with four selectable modes

Specifications

No published specifications for this item yet.

Questions about this item

What cable length does the HDMI 2.0 splitter support for 3840x2160P at 60Hz?

The splitter works with high-speed HDMI cables up to the standard 18 Gbps limit for 4K 60Hz; keep runs within certified cable specs to avoid signal loss.

How do I switch between Mirror and Extend modes on Windows?

Press Windows + P on the connected PC and choose Duplicate for Mirror or Extend for a second desktop; the splitter then sends the same image to both outputs.

When should I change the EDID mode using the four-position switch?

Select a different EDID setting if a display shows no picture, wrong resolution, or missing audio — each position feeds a fixed timing table to the source.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.