We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black HDMI splitter box with short HDMI and USB-Micro cables attached

Vszerda

Vszerda HDMI Splitter 1 in 2 Out 4K 30 Hz with HDMI & USB-Micro Cables

SKU CH-R7E0-0KD6C

Splits one HDMI source to two displays at up to 3840 x 2160 30 Hz with included cables

  • Splits one HDMI source to two displays for simultaneous viewing
  • Supports 4K at 30 Hz with 3840 x 2160 resolution for sharp detail
  • Includes 3.28 ft HDMI and 1.4 ft USB-Micro cables for quick setup
  • Compact 2.5 x 2 x .5 inch design fits tight spaces and travels easily
  • Transmits up to 12 m input and 20 m output at lower resolutions

One-to-two HDMI splitter for mirrored displays

This HDMI splitter takes a single source and sends identical video and audio to two screens. It is intended for users who need the same picture on two TVs or monitors, such as a living-room TV and a bedroom display, or a console and a capture device. The unit only duplicates the signal; it cannot extend a desktop or switch between inputs.

4K at 30 Hz with distance limits

The splitter handles resolutions up to 3840 x 2160 at 30 Hz and also passes 1080p and 3D content. Over standard AWG26 cables it can carry an input signal up to 12 metres and an output signal up to 20 metres. When running at 4K the reliable distance drops to 8 metres for both input and output. It supports audio formats including DTS-HD, Dolby TrueHD, DTS, Dolby Digital, DSD and HBR.

Compact unit with included cables

The enclosure measures 2.5 x 2 x 0.5 inches and draws power from the source through a supplied 1.4 ft USB-Micro cable. A 3.28 ft HDMI cable is also included for the input connection. LED indicators show power and active output ports. If the source cannot supply enough current an external power adapter can be added, though none is bundled. The plug-and-play design requires no drivers or configuration.

Highlights

  • Splits one HDMI source to two displays for simultaneous viewing
  • Supports 4K at 30 Hz with 3840 x 2160 resolution for sharp detail
  • Includes 3.28 ft HDMI and 1.4 ft USB-Micro cables for quick setup
  • Compact 2.5 x 2 x .5 inch design fits tight spaces and travels easily
  • Transmits up to 12 m input and 20 m output at lower resolutions

Specifications

No published specifications for this item yet.

Questions about this item

Will this splitter work with my older 1080p TV and a newer 4K monitor at the same time?

Yes, it duplicates the input to both outputs; the source will send a single resolution that both displays can handle, so set it to 1080p for the older TV.

How can I verify the 4K 30 Hz signal is passing through correctly after I connect everything?

Check the LED indicator lights on the unit — they show active power and signal — then confirm the source device reports 3840 x 2160 at 30 Hz in its display settings.

The box lists a 3.28 ft HDMI cable and a 1.4 ft USB-Micro cable; what else do I need to buy separately?

An external power adapter is not included; if your source cannot supply enough power over USB, you will need a standard 5 V USB power supply.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.