We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black HDMI splitter box with short HDMI and USB-Micro cables attached

Vszerda

Vszerda HDMI Splitter 1×2 4K 30Hz with HDMI & USB-Micro Cables

SKU CH-0CQ2-7NXXC

Splits one HDMI source to two displays at up to 3840 x 2160 30Hz with included 3.28 ft HDMI and 1.4 ft USB-Micro cables

  • Duplicate one source to two displays with zero loss or delay
  • Includes 3.28 ft HDMI and 1.4 ft USB-Micro cables for quick setup
  • Compact 2.5 x 2 x 0.5 inch design with plug-and-play LED indicators
  • Supports 3840 x 2160 at 30 Hz plus Full HD, 3D and multi-channel audio
  • Transmits 12 m input and 20 m output at standard resolutions

One input duplicated to two displays

This HDMI splitter takes a single source and mirrors it across two screens with no loss or delay. It supports duplication mode only and cannot extend or switch the signal. The box includes a 3.28 ft HDMI cable and a 1.4 ft USB-Micro cable for power. Plug-and-play operation and LED indicators make setup immediate.

Suits mirroring setups, not extension

Ideal for showing the same 4K 30 Hz or Full HD 1080P image on two TVs, monitors or projectors. It handles 3D video and audio formats such as DTS-HD and Dolby TrueHD. Buyers who need independent content on each display or switching between sources should look at a matrix or switch instead.

Maximum 4K at 30 Hz

The highest supported resolution is 3840 x 2160 at 30 Hz. At that resolution both input and output cable runs are limited to 8 metres. Lower resolutions allow up to 12 metres input and 20 metres output with AWG26 cables. If your installation needs 4K at higher refresh rates this splitter will not meet the requirement.

Highlights

  • Duplicate one source to two displays with zero loss or delay
  • Includes 3.28 ft HDMI and 1.4 ft USB-Micro cables for quick setup
  • Compact 2.5 x 2 x 0.5 inch design with plug-and-play LED indicators
  • Supports 3840 x 2160 at 30 Hz plus Full HD, 3D and multi-channel audio
  • Transmits 12 m input and 20 m output at standard resolutions

Specifications

No published specifications for this item yet.

Questions about this item

What cables or power parts might I need to replace later?

The package includes a 3.28 ft HDMI cable and a 1.4 ft USB-Micro cable; the external power adapter is not included and may be needed if the USB power source cannot supply enough current for stable operation.

What is the first limit I will hit when running two 4K displays continuously?

At 3840 x 2160 30Hz the maximum reliable cable length drops to 8 meters for both input and output, so cable distance becomes the limiting factor before bandwidth or heat.

How much heat or fan noise does the splitter produce when powered all day?

The unit has no fan and draws power only through the USB-Micro port, so it runs silently with minimal warmth; the only visible activity is the LED indicator lights.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.