We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular network splitter with four RJ45 ports and a USB power cable attached

Vszerda

Vszerda Gigabit Ethernet Splitter 1 to 4 network connector

SKU CH-1GWX-FQXJ1

Splits one Ethernet cable into four ports for simultaneous 1000 Mbps Gigabit connections, powered via included USB cable

  • Connect four devices from one Ethernet cable
  • Gigabit speeds up to 1000Mbps supported
  • Works with Cat 5, 5e, 6, 7, 8 cables
  • USB power cable included for operation
  • Expands network ports without extra wiring

Gigabit Ethernet Splitter 1 to 4

This Vszerda splitter turns one RJ45 cable into four ports so four computers can share a single wired connection simultaneously. It solves the hassle of swapping cables when wall ports are limited. The unit requires external power via the included USB cable to operate. It is built for Cat 5 through Cat 8 cabling.

Build quality and daily connectivity

The compact adapter uses standard RJ45 jacks that accept common patch cables up to Cat 8 specification. Plug the upstream link into the single input and connect up to four devices to the outputs for instant port expansion. No software configuration is needed; the device works as a simple unmanaged switch. The USB power lead can run from any convenient 5 V source such as a wall charger or PC port.

Thermals noise and power draw

Passive cooling keeps the unit silent during operation with no moving parts to generate noise. Power consumption stays low because the device only draws what the USB supply provides for the switching logic. The small footprint produces minimal heat even when all four ports carry traffic at 1000 Mbps. It sits unobtrusively on a desk or behind equipment without adding audible fan noise.

Highlights

  • Connect four devices from one Ethernet cable
  • Gigabit speeds up to 1000Mbps supported
  • Works with Cat 5, 5e, 6, 7, 8 cables
  • USB power cable included for operation
  • Expands network ports without extra wiring

Specifications

No published specifications for this item yet.

Questions about this item

What speed does the Gigabit Ethernet Splitter 1 to 4 actually deliver to connected devices?

The splitter supports up to 1000Mbps total bandwidth; three devices share that 1000Mbps pool while a single device can use the full 1000M.

What cables and power does the Vszerda splitter need to work?

It requires Cat5e, Cat6, Cat7 or Cat8 cables plus the included USB cable for power.

How do I set up the splitter so all four ports work?

Connect the incoming Ethernet cable, plug the USB cable into a powered port, then attach up to four devices.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.