We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small aluminium box with one RJ45 input and three RJ45 outputs

Vszerda

Vszerda Gigabit Ethernet Splitter 1 to 3 1000Mbps RJ45 network connector

SKU CH-GBEQ-90VR7

Splits one Ethernet line into three ports so three devices can share a 1000 Mbps connection, powered by the included USB-C cable

  • Expands one Ethernet line to three devices
  • 1000Mbps Gigabit speed for fast data transfer
  • Aluminium alloy housing resists impact and heat
  • Works with Cat5e, Cat6, Cat7 and Cat8 cables
  • USB-C power cable included for stable operation

Three-port Gigabit splitter for tight cabling

This Vszerda adapter turns one RJ45 drop into three simultaneous 1000Mbps connections. It is aimed at home or office users who have only a single cable run through a wall but need to wire a PC, a TV and a set-top box without pulling new cable. A USB-to-USB-C power lead is included and must be connected for the switch to operate.

Sustained sharing of 1000Mbps total bandwidth

The three ports share the single gigabit uplink, so aggregate throughput never exceeds 1000Mbps. When all three devices are active they divide that pool, while a lone device can saturate the full line rate. The aluminium-alloy housing acts as a passive heatsink, allowing the switch chip to maintain line-rate forwarding during continuous file transfers or streaming sessions without throttling.

Fanless aluminium case runs silent and cool

No moving parts mean zero acoustic noise in a bedroom or meeting room. The metal enclosure dissipates the few watts drawn by the switch IC, so surface temperature stays low to the touch even after hours of use. Power comes from any standard USB port, keeping the overall draw well within typical laptop or charger limits.

Highlights

  • Expands one Ethernet line to three devices
  • 1000Mbps Gigabit speed for fast data transfer
  • Aluminium alloy housing resists impact and heat
  • Works with Cat5e, Cat6, Cat7 and Cat8 cables
  • USB-C power cable included for stable operation

Specifications

No published specifications for this item yet.

Questions about this item

Does the Vszerda Gigabit Ethernet Splitter generate noticeable heat or noise when left running continuously?

The aluminium alloy housing is designed for heat dissipation and the unit has no moving parts, so it runs silently and stays cool during all-day use.

What must I already have to power and connect the Vszerda splitter?

You need a USB power source for the included USB-to-USB-C cable and Cat 5/5e/6/7/8 Ethernet cables for each device you want to link.

Will the Vszerda splitter work reliably with older Cat 5e cabling and legacy 100 Mbps devices?

Yes, it is backward-compatible with Cat 5e and will negotiate the highest speed each connected device supports, up to the shared 1000 Mbps limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.