We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact RJ45 splitter with Cat 6 cable and USB power lead

Vszerda

Vszerda Gigabit Ethernet Splitter 1 to 2 with Cat 6 Cable and USB Power

SKU CH-HX64-HTZRR

Splits one gigabit Ethernet connection into two 1000 Mbps ports, includes a Cat 6 cable and USB power lead, works with Cat 5 to Cat 8 cables and requires no drivers

  • Splits one gigabit link into two 1000 Mbps ports
  • Includes Cat 6 cable and 31.5 in USB power lead
  • Works with Cat 5 through Cat 8 cables
  • Plug-and-play with no driver installation needed
  • Aluminium alloy shell with gold-plated pins for stable data

Vszerda Gigabit Ethernet Splitter 1 to 2

This compact adapter divides a single Gigabit Ethernet connection into two RJ45 ports, each capable of 1000 Mbps throughput. It is designed for users who need to connect two devices such as computers, smart TVs or set-top boxes where only one network drop is available. The splitter works with Cat 5 through Cat 8 cables and requires no driver installation. It is not suited for networks that demand more than two simultaneous wired endpoints.

Thermals noise and power draw

The unit draws power from the included 31.5 inch USB cable and must be connected to a 5 V source such as a USB charger or powered hub. Its aluminium alloy housing passively dissipates the small amount of heat generated during operation, so there are no fans and no audible noise. Power consumption remains low because the device only powers its internal switching logic and gold-plated contacts.

Bundled Cat 6 cable and USB power lead

A short Cat 6 patch cable is supplied so the splitter can be linked to the upstream router or switch immediately. The 31.5 inch USB power cable removes the need for a separate mains adapter when a spare USB port is nearby. Gold-plated pins and a shielded PCB inside the metal shell reduce crosstalk between the two output channels, helping each connected device maintain a stable Gigabit link.

Highlights

  • Splits one gigabit link into two 1000 Mbps ports
  • Includes Cat 6 cable and 31.5 in USB power lead
  • Works with Cat 5 through Cat 8 cables
  • Plug-and-play with no driver installation needed
  • Aluminium alloy shell with gold-plated pins for stable data

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the splitter and what step is often missed?

Connect the incoming Ethernet cable to the single RJ45 port, attach two outgoing Cat 5/5e/6/7/8 cables to the dual ports, then plug the included 31.5in USB cable into any 5V USB power source — the splitter will not work without external power.

What maintenance or replacement will this adapter need later?

The gold-plated RJ45 pins and aluminium-alloy housing are solid-state with no moving parts, so no scheduled maintenance is required; only replace the unit if a port is physically damaged or the USB power cable fails.

What throughput limit appears first under sustained use?

The chipset caps total bandwidth at 1000 Mbps shared across both outputs, so simultaneous transfers on the two ports will contend for that single gigabit ceiling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.