We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black RJ45 splitter with one male port and two female ports plus short USB power lead

Vszerda

Vszerda Gigabit Ethernet Splitter 1 to 2 USB Powered 1000Mbps network connector

SKU CH-HR37-6QBFF

Splits one Ethernet cable into two simultaneous 1000 Mbps connections with USB power

  • Connects two devices to one Ethernet line
  • 1000Mbps throughput on each of the two ports
  • USB-powered so the splitter works without an external adapter
  • Gold-plated RJ45 contacts for reliable signal transfer
  • Works with Cat5 through Cat8 cables

One-to-two gigabit Ethernet splitter

The Vszerda RJ45 adapter splits a single network cable into two active ports so two devices can share one line. It draws power from an included USB cable and supports Cat5 through Cat8 wiring. The unit is built with gold-plated contacts and a shielded PCB for stable signal transmission.

Suitable for adding a second wired connection

Builders who need both ports to run at full gigabit simultaneously will find each link capped at 1000 Mbps. Users who require switch-like isolation between devices or auto-negotiation above 1 Gbps should consider a powered switch instead.

1000 Mbps shared throughput per port

The splitter delivers up to 1000 Mbps on each of the two RJ45 outputs when powered via USB. Without the USB connection the adapter cannot function, so a free USB port or charger is mandatory for operation.

Highlights

  • Connects two devices to one Ethernet line
  • 1000Mbps throughput on each of the two ports
  • USB-powered so the splitter works without an external adapter
  • Gold-plated RJ45 contacts for reliable signal transfer
  • Works with Cat5 through Cat8 cables

Specifications

No published specifications for this item yet.

Questions about this item

What maximum speed does the RJ45 splitter deliver on each of its two ports?

Each of the two output ports can reach up to 1000Mbps, and the signal transmission of the two cable groups does not interfere with each other.

What physical cables and connectors does the adapter accept?

The splitter uses an RJ45 8P8C jack and is compatible with Cat5, Cat5e, Cat6, Cat7 and Cat8 Ethernet cables.

How is the device powered and what is a common setup mistake?

It requires the included USB power cable; the splitter will not work without that connection, so forgetting to plug in the USB lead is the step people get wrong.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.