We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular 150W power adapter with 6.5 x 3.0 mm barrel connector and detachable mains cord

Vszerda

Vszerda FSP150-AHAN1 12V 12.5A 150W 6.5 x 3.0 mm computer power adapter cord

SKU CH-E67J-FFZFS

Delivers 150 W at 12 V and 12.5 A through a 6.5 x 3.0 mm barrel plug for Drobo 5D Thunderbolt and Gen3 DDR3A21 units

  • Delivers 150 W to power demanding storage arrays
  • 12 V 12.5 A output matches Drobo 5D Thunderbolt specs
  • 5 x 3.0 mm barrel fits original connector exactly
  • 100-240 V 50-60 Hz input works worldwide
  • CE certified for safety compliance

FSP150-AHAN1 150W Adapter for Drobo 5D

This 150W AC adapter delivers 12V at 12.5A for Drobo 5D Thunderbolt Gen3 and Direct Attached Storage units. It replaces part numbers FSP150-AHAN1 and 22000082LF. The unit accepts 100-240V input at 50-60Hz and includes a power cord. A 6.5 x 3.0 mm barrel plug connects to the device.

Suits Drobo 5D owners needing a replacement charger

This adapter fits the listed Drobo 5D models requiring a 12V 12.5A supply with a 6.5 x 3.0 mm connector. It will not work for devices that need a different voltage, a higher current rating or a different plug size. Buyers with non-Drobo equipment or units specifying another part number should look elsewhere.

Deciding spec: 6.5 x 3.0 mm barrel plug

The 6.5 x 3.0 mm connector is the single detail that determines physical compatibility with the Drobo 5D power port. If the original adapter uses a different plug diameter or pin layout, this unit cannot connect. Verify the plug dimensions on the existing hardware before ordering.

Highlights

  • Delivers 150 W to power demanding storage arrays
  • 12 V 12.5 A output matches Drobo 5D Thunderbolt specs
  • 5 x 3.0 mm barrel fits original connector exactly
  • 100-240 V 50-60 Hz input works worldwide
  • CE certified for safety compliance

Specifications

No published specifications for this item yet.

Questions about this item

What size barrel connector does the FSP150-AHAN1 adapter use?

The adapter plug measures 6.5 x 3.0 mm, matching the DC input on Drobo 5D Thunderbolt and Gen3 DDR3A21 units.

How do I connect the AC cord to the adapter brick?

Plug the supplied IEC C7 power cord into the brick's inlet, then insert the 6.5 x 3.0 mm barrel into the Drobo; the brick accepts 100-240V 50-60Hz mains automatically.

When should I replace the power cord or adapter?

Replace the cord if the insulation cracks or the plug loosens; replace the adapter if output drops below 12V 12.5A or the brick overheats during normal Drobo 5D operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.