We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda external power switch with 1.7m cable, adhesive mount, LED button, splitter board

Vszerda

Vszerda External Power Switch with 1.7M Cable

SKU CH-KV7B-H3V4H

An external power switch with 1.7 m cable and splitter that adds a convenient on/off button and power LED for cases placed in hard-to-reach spots

  • External power button for hard-to-reach cases
  • 7 m cable reaches convenient operating position
  • Adhesive backing enables tool-free mounting
  • 1-to-2 splitter keeps original front button working
  • Replaces damaged chassis panel switches easily

External Power Switch for Desktop PCs

This Vszerda external power switch adds a remote ON/OFF button with a 1.7 metre cable. It connects to the motherboard's POWER SW, POWER LED+ and POWER LED- headers. The adhesive backing lets you mount the button wherever the original case switch is hard to reach.

Capacity and headroom

The 1.7 metre cable provides enough length to route the switch from a rear expansion slot, optical-drive bay or fan window to a convenient spot on the desk. It handles standard ATX front-panel signalling and includes a 1-to-2 splitter so the original case button remains functional. The adhesive mount is not suited to surfaces that reject stickers.

Installation and compatibility

The switch uses the standard two-pin power-switch and three-pin LED pinout found on most desktop motherboards. No driver or BIOS change is required; the board simply parallels the existing front-panel header. Builders whose motherboards use a proprietary front-panel connector cannot use this part.

Highlights

  • External power button for hard-to-reach cases
  • 7 m cable reaches convenient operating position
  • Adhesive backing enables tool-free mounting
  • 1-to-2 splitter keeps original front button working
  • Replaces damaged chassis panel switches easily

Specifications

No published specifications for this item yet.

Questions about this item

Will the 1.7 m cable reach my motherboard if the PC sits under the desk?

The 1.7 m cable runs from the external button to the motherboard headers, so you can route it along the desk edge or through a cable grommet to suit your layout.

How do I confirm the power LED and switch are wired correctly after installation?

Press the external button — the system should power on and the LED on the switch should light, confirming the POWER SW and POWER LED± pins are seated properly.

Does the package include everything needed to keep my original front-panel button working too?

Yes — the box contains the external switch with 1.7 m cable, a 1-to-2 splitter board, adhesive stickers and an installation manual so both buttons can operate together.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.