Vszerda Ethernet Splitter 1 to 3 1000Mbps USB Powered network connector

Three-way RJ45 splitter for wired networks

The Vszerda Ethernet Splitter divides one RJ45 socket into three female ports so three devices can share a single wired line at the same time. It is intended for homes or offices where additional cabling is impractical and a quick physical split is preferred over running new wires. The adapter handles 1000 Mbps throughput per cable set and supports cascading for extended layouts. IPTV signals are not supported.

USB-powered operation with plug-and-play simplicity

A 0.8 metre USB cable supplies the power the splitter needs to function; no external power brick or software configuration is required. Any of the three ports can serve as the input while the remaining ports act as outputs, giving flexibility when connecting computers, switches, televisions, set-top boxes or monitoring equipment. Gold-plated pins and metal shielding maintain signal integrity across the split.

Sustained 1000 Mbps per link without crosstalk

Under continuous load each cable set maintains up to 1000 Mbps because signals are isolated by the physical design rather than shared bandwidth arbitration. The rigid PVC housing resists impact, heat and low temperatures, while thickened PCB construction supports reliable long-term operation. Pure physical connection means no IP assignment overhead or protocol negotiation delays during extended use.