We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda EP-050-RI-HX NVME SATA Extension Adapter 30cm 90° M-Key

SKU CH-22RW-Z30M5

Extends M-key NVME or SATA SSDs with a 30 cm, 90-degree angled cable supporting PCIe 4.0 speeds up to 64 Gbps

  • ColorBlack
  • Specifications0.05 kilograms
  • FeaturesAngled Type
  • Extends NVME SSDs up to 64Gbps with PCI-E 4.0 support
  • Connects SATA drives at 6Gbps through the same flexible cable
  • Right-angled M-key plug fits tight spaces around the motherboard socket
  • 30cm ultra-flexible PVC cable bends easily for clean internal routing
  • Supports 2230 2242 2260 2280 and 22110 form factors without conversion

Extension for M-Key NVME and SATA

This 30cm right-angled adapter extends an M-Key NVME or SATA device from the motherboard socket. It supports module lengths 2230, 2242, 2260, 2280 and 22110. The 90-degree plug fits tight spaces around the connector. It is built for builders who need to relocate a drive without changing its protocol.

Two PCBA boards with flexible PVC cable

The kit includes two circuit boards joined by a 30cm cable wrapped in integrated PVC. The copper conductors and flat profile make routing easy in compact chassis. The assembly weighs 0.05 kilograms. It does not convert NVME to SATA or SATA to NVME, so buyers who need protocol conversion must look elsewhere.

PCIe 4.0 and NVME 1.4 interface limits

The link runs at PCI Express 4.0 with NVME 1.4, reaching 64Gbps for NVME and 6Gbps for SATA. Bandwidth is capped by the host controller and drive capabilities. The M-Key connector carries either protocol but not both simultaneously. Builders needing longer reach or different keying cannot use this adapter.

Highlights

  • Extends NVME SSDs up to 64Gbps with PCI-E 4.0 support
  • Connects SATA drives at 6Gbps through the same flexible cable
  • Right-angled M-key plug fits tight spaces around the motherboard socket
  • 30cm ultra-flexible PVC cable bends easily for clean internal routing
  • Supports 2230 2242 2260 2280 and 22110 form factors without conversion

Specifications

BrandVszerda
ModelEP-050-RI-HX
Part NumberEP-050-RI-HX
ColorBlack
Specifications0.05 kilograms
FeaturesAngled Type

Questions about this item

Will the 30 cm flexible PVC cable or the 90-degree M-Key connectors need periodic replacement under normal use?

The cable uses copper lines inside an integrated PVC jacket designed for repeated bending, and the right-angled M-Key plug reduces mechanical stress on the motherboard socket, so no scheduled replacement is required.

What throughput ceiling will I hit first when running large sustained transfers over the PCI-E 4.0 link?

NVMe 1.4 traffic is capped at 64 Gbps and NGFF SATA traffic at 6 Gbps, so the protocol limit — not the cable — becomes the bottleneck during heavy continuous workloads.

Does the adapter generate noticeable heat or draw extra power when the SSD runs all day?

As a passive extension with no active components, it adds no measurable heat or power draw beyond the drive itself, and the ultra-flexible PVC construction does not trap warmth.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.