We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black NVME SATA extension adapter with 30cm flexible PVC cable and male to female connectors

Vszerda

Vszerda EP-050-BK NVME SATA Extension Adapter 30cm

SKU CH-XMPN-HMAZM

Extends NVME or SATA M.2 drives 30cm with PCIe 4.0 support up to 64Gbps

  • ColorBlack
  • Specifications0.04 kilograms
  • FeaturesExtender
  • Extends NVME or SATA drives up to 30cm without protocol conversion
  • Flexible PVC jacket and copper lines enable tight bends inside compact cases
  • Supports NVME 1.4 at 64Gbps and SATA at 6Gbps for full SSD speed
  • Compatible with M-Key sockets for 2230 2242 2260 2280 22110 form factors
  • Lightweight 0.04kg dual-PCBA assembly adds minimal load to motherboard slot

NVME and SATA extension cable

The Vszerda EP-050-BK is a male-to-female adapter that extends an NVME or SATA solid-state drive away from its motherboard socket. It suits builders who need to route a drive around tight clearances or mount it in a remote bracket. The package contains two small circuit boards joined by a flexible 30cm cable.

PCI-E 4.0 and NVMe 1.4 limits

The link operates at PCI-E 4.0 speeds, so NVME drives are capped at the 64Gbps ceiling defined by the NVMe 1.4 specification. SATA drives remain limited to 6Gbps regardless of the faster bus. The adapter does not perform any protocol translation, so an NVME drive cannot be plugged into a SATA host or vice versa.

M-Key M.2 socket compatibility

This part fits M-Key M.2 sockets and accepts drive lengths from 2230 up to 22110 millimetres. It cannot convert between key types or bridge an M-Key drive to a B-Key or E-Key slot. Buyers with a non-M-Key socket or a drive longer than 22110mm need a different solution.

Highlights

  • Extends NVME or SATA drives up to 30cm without protocol conversion
  • Flexible PVC jacket and copper lines enable tight bends inside compact cases
  • Supports NVME 1.4 at 64Gbps and SATA at 6Gbps for full SSD speed
  • Compatible with M-Key sockets for 2230 2242 2260 2280 22110 form factors
  • Lightweight 0.04kg dual-PCBA assembly adds minimal load to motherboard slot

Specifications

BrandVszerda
ModelEP-050-BK
Part NumberEP-050-BK
ColorBlack
Specifications0.04 kilograms
FeaturesExtender

Questions about this item

Should I choose the 30cm or 40cm version for my build?

The cable supplied is 30cm long; the 40cm figure appears only in the supplier title.

What does the 64Gbps headline rate mean once installed?

It is the PCI‑E 4.0 x4 ceiling for NVMe 1.4 drives; actual throughput depends on the SSD and host controller.

Which interface standard does the adapter use and what does it cap?

It passes PCI‑E 4.0 signals for NVMe (up to 64Gbps) and SATA 6Gbps for NGFF SATA drives; no protocol conversion is performed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.