We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular USB-C enclosure with dual M.2 slots and SATA adapter

Vszerda

Vszerda Dual NGFF B+M-Key M.2 SATA Combo Enclosure

SKU CH-NK25-NKNA6

Holds two NGFF B+M-Key M.2 SATA SSDs in a USB 3.0 Type-C enclosure with JBOD or RAID 0 modes

  • Holds two NGFF B+M-Key M.2 SATA drives in one enclosure
  • JBOD mode lets each drive appear separately to the system
  • RAID 0 span combines both drives into a single volume
  • USB 3.0 Type-C link connects to laptop or desktop
  • Includes SATA-to-dual-NGFF adapter for 2.5-inch bay installation

Dual M.2 SATA enclosure for laptop or desktop

The Vszerda enclosure accepts two NGFF B+M-key M.2 SATA drives and presents them to a host over USB 3.0 Type-C or an internal SATA link. It is aimed at users who want to migrate existing SATA M.2 modules into an external or 2.5-inch bay without buying a RAID controller card.

Included USB-C case and SATA adapter expand

The bundle supplies a USB 3.0 Type-C enclosure plus a SATA-to-dual-NGFF adapter board. This lets the same two drives operate externally on a laptop or internally in a desktop drive bay, and the host can address each drive independently in JBOD mode or combine them in RAID 0 or span mode when the operating system supports it.

Limited to SATA M.2 drives and USB 3.0 speeds

The bridge does not support M-key NVMe PCIe SSDs, so faster PCIe modules cannot be used. Throughput is bounded by the USB 3.0 Gen 1 interface and the SATA 6 Gbit/s lane, and the enclosure requires a host that can manage software RAID if a striped or spanned volume is desired.

Highlights

  • Holds two NGFF B+M-Key M.2 SATA drives in one enclosure
  • JBOD mode lets each drive appear separately to the system
  • RAID 0 span combines both drives into a single volume
  • USB 3.0 Type-C link connects to laptop or desktop
  • Includes SATA-to-dual-NGFF adapter for 2.5-inch bay installation

Specifications

No published specifications for this item yet.

Questions about this item

Will the SATA adapter need replacement if I upgrade to NVMe drives later?

The included SATA to dual NGFF adapter only supports B+M-key SATA SSDs, so it cannot be used with M-key NVMe PCIe drives and would need a different adapter.

What speed limit appears first when both M.2 slots run in JBOD or RAID 0 over USB 3.0?

The USB 3.0 Type-C link tops out at 5 Gbps, which becomes the bottleneck before the SATA SSDs reach their own 6 Gbps ceiling.

How much heat does the enclosure generate during all-day operation with two SATA SSDs?

The aluminium shell acts as a passive heatsink for both drives, and with no fan the surface stays warm but within normal SATA SSD operating temperatures.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.