We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact adapter board with two M.2 slots and 2.5 inch SATA connector

Vszerda

Vszerda Dual MSATA NGFF B+M JBOD Raid0 Bridge to 2.5 SATA Cable

SKU CH-XDD5-1PP5W

Connects two M.2 SATA SSDs to a single 2.5 SATA port with JBOD or RAID 0 spanning

  • Connect two SSDs as one volume using JBOD or RAID0
  • Supports mSATA and NGFF B+M Key SATA drives
  • Works inside desktops and laptops with 2.5 SATA bays
  • Drives operate independently in JBOD mode for flexible storage
  • Bridge card combines dual slots into a single SATA connection

Dual MSATA and NGFF Bridge

This adapter lets you install two MSATA or NGFF B+M SATA SSDs into a single 2.5 inch SATA bay. It presents the drives to the host system as a JBOD span or a RAID 0 array depending on controller support. The board fits desktops and laptops that have a standard 2.5 inch SATA slot.

Suits builders combining two SATA M.2 drives

It works only with MSATA and NGFF B+M modules that operate in SATA mode. Builders who need to use PCIe-only M.2 drives or who require a single-drive enclosure should choose a different adapter. The bridge does not add RAID functions without host-side support.

JBOD and RAID 0 span mode

Dual drives appear as one logical volume when the host system enables spanning or RAID 0. Each drive can also be addressed separately in JBOD mode. The single specification that decides compatibility is the SSD interface: MSATA or NGFF B+M SATA only.

Highlights

  • Connect two SSDs as one volume using JBOD or RAID0
  • Supports mSATA and NGFF B+M Key SATA drives
  • Works inside desktops and laptops with 2.5 SATA bays
  • Drives operate independently in JBOD mode for flexible storage
  • Bridge card combines dual slots into a single SATA connection

Specifications

No published specifications for this item yet.

Questions about this item

How do I verify the Vszerda bridge is presenting both MSATA and NGFF B+M drives correctly after installation?

Connect the bridge to a desktop or laptop SATA port, then open the operating system's disk management utility to confirm each SSD appears as a separate volume in JBOD mode or as a single combined volume when RAID 0 is configured by the host system.

What comes with the Vszerda Dual MSATA NGFF B+M bridge and what must I supply separately?

The bridge enclosure itself is included; you must provide your own MSATA and NGFF B+M SATA-mode SSDs as well as a standard 2.5 inch SATA data and power connection from the host system.

Which SSD types should I choose for the Vszerda bridge to enable JBOD or RAID 0 operation?

Use any combination of MSATA and NGFF B+M drives that operate in SATA mode; both slots accept either form factor so you can mix them or use two of the same type depending on the drives you already own.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.